Mostrando 10 resultados de: 11
Filtros aplicados
Subtipo de publicación
Article(11)
Publisher
Polymers(4)
Dyna (Spain)(2)
Journal of Applied Polymer Science(2)
Applied Sciences (Switzerland)(1)
Clean Technologies(1)
Área temáticas
Tecnología de otros productos orgánicos(11)
Ingeniería y operaciones afines(5)
Ingeniería sanitaria(2)
Otros problemas y servicios sociales(2)
Cuero y peletería(1)
Área de conocimiento
Ciencia de materiales(9)
Polímero(5)
Ingeniería ambiental(2)
Ingeniería química(2)
Material compuesto(2)
Comparative characterization of gum rosins for their use as sustainable additives in polymeric matrices
ArticleAbstract: There is a growing interest in the use of non-polluting compounds, which come from renewable sourcesPalabras claves:Biomaterials, Differential scanning calorimetry, Gas chromatography, Gum rosin, Resins, thermogravimetric analysisAutores:Cristina Pavon, Hernández-Fernández J., López-Martínez J., Miguel Fernando Aldas CarrascoFuentes:scopusEffect of Epoxidized and Maleinized Corn Oil on Properties of Polylactic Acid (PLA) and Polyhydroxybutyrate (PHB) Blend
ArticleAbstract: The present work analyzes the influence of modified, epoxidized and maleinized corn oil as a plasticPalabras claves:blend, modified corn oil, Polyhydroxybutyrate, Polylactic acidAutores:Cristina Pavon, De-La-Rosa-Ramírez H., José Miguel Ferri, María Dolores Samper, Sempere-Torregrosa J.Fuentes:scopusImprovement of pbat processability and mechanical performance by blending with pine resin derivatives for injection moulding rigid packaging with enhanced hydrophobicity
ArticleAbstract: Polybutylene adipate-co-terephthalate (PBAT) is a biodegradable polymer with good features for packaPalabras claves:blends, Compatibility effect, Gum rosin, hydrophobicity, Packaging, Pine resin, Plasticizing effect, Polybutylene adipate-co-terephthalate (PBAT)Autores:Cristina Pavon, De-La-Rosa-Ramírez H., López-Martínez J., Miguel Fernando Aldas Carrasco, Patricia Arrieta M.Fuentes:scopusInfluence of the Presence of Poly(butylene succinate) in the Poly(ethylene terephthalate) Recycling Process
ArticleAbstract: Poly(butylene succinate) (PBS) is one of the contaminants in the Poly(ethylene terephthalate) (PET)Palabras claves:Contaminant, Degradation, Poly(butylene succinate), Poly(ethylene terephthalate), recyclingAutores:Bertomeu D., Cristina Pavon, De-La-Rosa-Ramírez H., López-Martínez J., María Dolores Samper, Miguel Fernando Aldas CarrascoFuentes:scopusIdentification of biodegradable polymers as contaminants in the thermoplastics recycling process
ArticleAbstract: In this work, the presence of biodegradable polymers in recycled plastic materials was characterizedPalabras claves:Biodegradable plastics, Polyethylene terephthalate, Polypropylene, Polystyrene, recyclingAutores:Bertomeu D., Cristina Pavon, José Miguel Ferri, María Dolores Samper, Miguel Fernando Aldas Carrasco, Pawlak F.Fuentes:scopusIonizing radiation as adjuvant for the abiotic degradation of plastic bags containing pro-oxidant additives
ArticleAbstract: The effects of ionizing radiation in promoting the abiotic degradation mechanisms in oxo-degradablePalabras claves:Degradation, Mechanical properties, ThermoplasticsAutores:Cristina Pavon, Jenny Aguilar, Maribel Luna, Miguel Fernando Aldas Carrasco, Santos Roque, Vladimir ValleFuentes:googlescopusRecycling of modified asphalt sheets for automotive use
ArticleAbstract:Palabras claves:Autores:Andres Acevedo, Andres F. Ribadeneira, Cristina Pavon, De-La-Rosa-Ramírez H., Miguel Fernando Aldas Carrasco, Vladimir ValleFuentes:googlescopusMechanical, Dynamic-Mechanical, Thermal and Decomposition Behavior of 3D-Printed PLA Reinforced with CaCO<inf>3</inf> Fillers from Natural Resources
ArticleAbstract: This study evaluates the effect of CaCO3 fillers extracted from waste eggshells on 3Dprinted PLA perPalabras claves:3D-printing, biological filler, decomposition, dynamic-mechanical, mechanical, PLA polymer, surface appearance, thermal, WettabilityAutores:Cristina Pavon, Ferrandiz-Bou S., López-Martínez J., María Dolores Samper, Miguel Fernando Aldas Carrasco, Motoc D.L.Fuentes:scopusPine resin derivatives as sustainable additives to improve the mechanical and thermal properties of injected moulded thermoplastic starch
ArticleAbstract: Fully bio-based materials based on thermoplastic starch (TPS) were developed starting from corn starPalabras claves:bioplastic, corn starch, Glycerol, Gum rosin, Injection-moulding, Thermoplastic starchAutores:Cristina Pavon, Lopez-Martinez J., Miguel Fernando Aldas Carrasco, Patricia Arrieta M.Fuentes:scopusNew materials for 3D-printing based on polycaprolactone with gum rosin and beeswax as additives
ArticleAbstract: In this work, different materials for three-dimensional (3D)-printing were studied, which based on pPalabras claves:3D-printing, beeswax, Gum rosin, Natural additives, PolycaprolactoneAutores:Cristina Pavon, Ferrandiz-Bou S., López-Martínez J., Miguel Fernando Aldas CarrascoFuentes:scopus