Mostrando 10 resultados de: 13
Publisher
Polymers(3)
Composites Part B: Engineering(1)
Composites Science and Technology(1)
Fibers and Polymers(1)
JAOCS, Journal of the American Oil Chemists' Society(1)
Área temáticas
Tecnología de otros productos orgánicos(9)
Ingeniería y operaciones afines(6)
Fabricación(3)
Textiles(2)
Construcción de edificios(1)
Área de conocimiento
Ciencia de materiales(11)
Material compuesto(7)
Polímero(6)
Ciencia agraria(1)
Ciencias Agrícolas(1)
Origen
scopus(13)
Development and Characterization of Polylactide Blends with Improved Toughness by Reactive Extrusion with Lactic Acid Oligomers
ArticleAbstract: In this work, we report the development and characterization of polylactide (PLA) blends with improvPalabras claves:environmentally friendly, improved toughness, lactic acid oligomer (OLA), maleinized linseed oil (MLO), polylactide (PLA), Reactive extrusionAutores:Diego Lascano, Fiori S., García-Sanoguera D., Gomez-Caturla J., Montanes N., Quiles‐carrillo L., Tejada-Oliveros R.Fuentes:scopusDevelopment and characterization of a new natural fiber reinforced thermoplastic (NFRP) with Cortaderia selloana (Pampa grass) short fibers
ReviewAbstract: In this work, fully bio-based thermoplastic composites are manufactured with bio-based polyethylenePalabras claves:Bio-based polyethylene, Cortaderia selloana, Mechanical properties, Natural fiber reinforced plastics (NFRP)Autores:Carbonell-Verdu A., García-Sanoguera D., Jorda-Vilaplana A., María Dolores Samper, Pop A.Fuentes:scopusGreen composites based on polypropylene matrix and hydrophobized spend coffee ground (SCG) powder
ArticleAbstract: Green composites were prepared with polypropylene matrix and 20 wt.% spent coffee ground (SCG) powdePalabras claves:A. Polymer-matrix composites (PMCs), B. Adhesion, B. Wettability, D. Thermal analysis-Spent coffee ground (SCG)Autores:Balart R., Carbonell A., García-García D., García-Sanoguera D., María Dolores SamperFuentes:scopusEvaluation of different compatibilization strategies to improve the performance of injection-molded green composite pieces made of polylactide reinforced with short flaxseed fibers
ArticleAbstract: Green composites made of polylactide (PLA) and short flaxseed fibers (FFs) at 20 wt % were successfuPalabras claves:Fiber pretreatment, flax, Green composites, Pla, Reactive extrusionAutores:Agüero Á., Diego Lascano, Fenollar O., García-Sanoguera D., Ivorra-Martínez J., Sandra Rojas-Lema, Torres-Giner S.Fuentes:scopusEffect of miscibility on mechanical and thermal properties of poly(lactic acid)/ polycaprolactone blends
ArticleAbstract: Binary blends based on poly(lactic acid) (PLA) and polycaprolactone (PCL) were prepared by melt mixiPalabras claves:Binary blends, Degradability, FESEM, Mechanical properties, poly(lactic acid) (PLA), Polycaprolactone (PCL)Autores:Balart R., Fenollar O., García-Sanoguera D., Jorda-Vilaplana A., José Miguel FerriFuentes:scopusEffects of aging on the adhesive properties of poly(lactic acid) by atmospheric air plasma treatment
ArticleAbstract: The aim of this study was to analyze the durability of a plasma treatment on the surface of poly(lacPalabras claves:Adhesives, aging, Biodegradable, Mechanical propertiesAutores:Carbonell A., García-Sanoguera D., Jorda-Vilaplana A., José Miguel Ferri, Sánchez-Nácher L.Fuentes:scopusManufacturing and Characterization of Hybrid Composites with Basalt and Flax Fabrics and a Partially Bio-based Epoxy Resin
ArticleAbstract: This research is focused on manufacturing and characterization of hybrid composite laminates obtainePalabras claves:Bio-based epoxy resin, Hybrid composites laminates, VARIMAutores:Agüero Á., Balart R., Boronat T., Diego Lascano, García-Sanoguera D., Montanes N.Fuentes:scopusManufacturing and characterization of environmentally friendly wood plastic composites using pinecone as a filler into a bio-based high-density polyethylene matrix
ArticleAbstract: The use of wood plastic composites (WPC) is growing very rapidly in recent years, in addition, the uPalabras claves:Mechanical properties, natural fillers, Pinecone, Polyethylene, Wood plastic compositeAutores:Diego Lascano, García-García D., García-Sanoguera D., Morcillo M.D.C., Tejada R.Fuentes:scopusValorization of linen processing by-products for the development of injection-molded green composite pieces of polylactide with improved performance
ArticleAbstract: This work reports the development and characterization of green composites based on polylactide (PLAPalabras claves:flax, Green composites, Multi-functionalized vegetable oils, Pla, Waste valorizationAutores:Agüero Á., Diego Lascano, Fenollar O., García-Sanoguera D., Torres-Giner S.Fuentes:scopusRecycling of expanded polystyrene from packaging
ArticleAbstract: Expanded polystyrene (EPS) is a commonly used polymer in the packaging industry. The great importancPalabras claves:Autores:García-Sanoguera D., López J., María Dolores Samper, Parres F.Fuentes:scopus