Mostrando 10 resultados de: 11
Subtipo de publicación
Article(11)
Publisher
Polymers(4)
Polymer International(2)
Carbohydrate Polymers(1)
Composites Part B: Engineering(1)
Materials(1)
Área temáticas
Tecnología de otros productos orgánicos(8)
Ingeniería y operaciones afines(7)
Fabricación(3)
Textiles(2)
Bioquímica(1)
Área de conocimiento
Ciencia de materiales(10)
Polímero(8)
Material compuesto(2)
Biotecnología(1)
Nanostructura(1)
Objetivos de Desarrollo Sostenible
ODS 12: Producción y consumo responsables(11)
ODS 9: Industria, innovación e infraestructura(10)
ODS 2: Hambre cero(1)
Origen
scopus(11)
Compatibilization and characterization of polylactide and biopolyethylene binary blends by non-reactive and reactive compatibilization approaches
ArticleAbstract: In this study, different compatibilizing agents were used to analyze their influence on immiscible bPalabras claves:biopolymers, blends, Compatibilizing agents, Microscopic techniques, PolylactideAutores:Balart R., García-García D., José Miguel Ferri, María Dolores Samper, Rayon E.Fuentes:scopusEffect of miscibility on mechanical and thermal properties of poly(lactic acid)/ polycaprolactone blends
ArticleAbstract: Binary blends based on poly(lactic acid) (PLA) and polycaprolactone (PCL) were prepared by melt mixiPalabras claves:Binary blends, Degradability, FESEM, Mechanical properties, poly(lactic acid) (PLA), Polycaprolactone (PCL)Autores:Balart R., Fenollar O., García-Sanoguera D., Jorda-Vilaplana A., José Miguel FerriFuentes:scopusDevelopment and evaluation of novel nanofibers based on mango kernel starch obtained by electrospinning
ArticleAbstract: This work reports on the development of fibers based on natural mango kernel starch (MKS) with diamePalabras claves:Electrospinning, Mango kernel starch, nanofibers, PVA, PVPAutores:Balart R., Diego Lascano, Dominici F., García-García D., Gomez-Caturla J., Ivorra-Martínez J., Puglia D., Torre L.Fuentes:scopusDevelopment of slate fiber reinforced high density polyethylene composites for injection molding
ArticleAbstract: During the last decade the use of fiber reinforced composite materials has consolidated as an attracPalabras claves:A. Fibres, B. Mechanical properties, B. Microstructures, E. Injection molding, E. Thermoplastic resinAutores:Balart R., Carbonell-Verdu A., García-García D., Jordá A., María Dolores SamperFuentes:scopusFunctionalization of partially bio-based poly(ethylene terephthalate) by blending with fully bio-based poly(amide) 10,10 and a glycidyl methacrylate-based compatibilizer
ArticleAbstract: This work shows the potential of binary blends composed of partially bio-based poly(ethyelene terephPalabras claves:bio-based, compatibilization, Mechanical properties, MORPHOLOGY, Poly(amide) 1010-PA1010, Poly(ethyelene terephthalate)-PET, Xibond™ 920Autores:Balart R., Diego Lascano, Jorda M., Montanes N., Montava-Jorda S., Quiles‐carrillo L.Fuentes:scopusStudy of the influence of the reprocessing cycles on the final properties of polylactide pieces obtained by injection molding
ArticleAbstract: This research work aims to study the influence of the reprocessing cycles on the mechanical, thermalPalabras claves:Circular economy, Extrusion cycles, injection molding, Mechanical recycling, PlaAutores:Agüero Á., Balart R., Boronat T., Diego Lascano, Fenollar O., Morcillo M.D.C., Quiles‐carrillo L., Torres-Giner S.Fuentes:scopusThe effect of maleinized linseed oil (MLO) on mechanical performance of poly(lactic acid)-thermoplastic starch (PLA-TPS) blends
ArticleAbstract: In this work, poly(lactic acid), PLA and thermoplastic starch, TPS blends (with a fixed content of 3Palabras claves:Maleinized linseed oil, Plasticizing, poly(lactic acid), Thermoplastic starchAutores:Balart R., Fenollar O., García-García D., José Miguel Ferri, Sánchez-Nácher L.Fuentes:scopusProcessing and characterization of binary poly(hydroxybutyrate) (PHB) and poly(caprolactone) (PCL) blends with improved impact properties
ArticleAbstract: The present work is focused on the development of binary blends from poly(hydroxybutyrate) (PHB) andPalabras claves:Autores:Balart R., Boronat T., García-García D., José Miguel Ferri, Lopez-Martinez J.Fuentes:scopusPlasticization effects of epoxidized vegetable oils on mechanical properties of poly(3-hydroxybutyrate)
ArticleAbstract: The effect of various epoxidized vegetable oils as potential plasticizers for poly(3-hydroxybutyratePalabras claves:Biodegradable, Epoxidized linseed oil (ELO), epoxidized soybean oil (ESBO), plasticization, poly(3-hydroxybutyrate) (PHB)Autores:Balart R., García-García D., José Miguel Ferri, Lopez-Martinez J., Montanes N.Fuentes:scopusPlasticized Mechanical Recycled PLA Films Reinforced with Microbial Cellulose Particles Obtained from Kombucha Fermented in Yerba Mate Waste
ArticleAbstract: In this study, yerba mate waste (YMW) was used to produce a kombucha beverage, and the obtained micrPalabras claves:CELLULOSE, Food packaging, Kombucha, Pla, yerba mateAutores:Abarca de las Muelas S.S., Agüero Á., Balart R., Corral Perianes E., de la Fuente García-Soto M.d.M., Diego Lascano, Patricia Arrieta M., Peltzer M.A.Fuentes:scopus