Mostrando 10 resultados de: 10
Filtros aplicados
Subtipo de publicación
Article(10)
Área temáticas
Tecnología de otros productos orgánicos(8)
Ingeniería y operaciones afines(7)
Fabricación(2)
Industria papelera(2)
Ingeniería química(2)
Área de conocimiento
Ciencia de materiales(9)
Material compuesto(4)
Polímero(3)
Cinética química(2)
Ingeniería química(2)
Objetivos de Desarrollo Sostenible
ODS 12: Producción y consumo responsables(10)
ODS 9: Industria, innovación e infraestructura(9)
ODS 17: Alianzas para lograr los objetivos(4)
ODS 7: Energía asequible y no contaminante(3)
ODS 13: Acción por el clima(2)
Origen
scopus(10)
Compatibilization and characterization of polylactide and biopolyethylene binary blends by non-reactive and reactive compatibilization approaches
ArticleAbstract: In this study, different compatibilizing agents were used to analyze their influence on immiscible bPalabras claves:biopolymers, blends, Compatibilizing agents, Microscopic techniques, PolylactideAutores:Balart R., García-García D., José Miguel Ferri, María Dolores Samper, Rayon E.Fuentes:scopusDynamic–mechanical and decomposition properties of flax/basalt hybrid laminates based on an epoxidized linseed oil polymer
ArticleAbstract: This contribution focuses on the development of flax and flax/basalt hybrid reinforced composites baPalabras claves:Basalt, Dynamic–mechanical, Epoxidized linseed oil (ELO), flax, Green composites, massAutores:Balart R., Ferrandiz-Bou S., García-García D., José Miguel Ferri, Motoc D.L.Fuentes:scopusDevelopment of injection-molded polylactide pieces with high toughness by the addition of lactic acid oligomer and characterization of their shape memory behavior
ArticleAbstract: This work reports the effect of the addition of an oligomer of lactic acid (OLA), in the 5-20 wt% raPalabras claves:Impact modifier, OLA, Packaging applications, Pla, Shape memoryAutores:Balart R., Boronat T., Diego Lascano, Ivorra-Martínez J., Moraga G., Quiles‐carrillo L., Sandra Rojas-Lema, Torres-Giner S.Fuentes:scopusFunctionalization of partially bio-based poly(ethylene terephthalate) by blending with fully bio-based poly(amide) 10,10 and a glycidyl methacrylate-based compatibilizer
ArticleAbstract: This work shows the potential of binary blends composed of partially bio-based poly(ethyelene terephPalabras claves:bio-based, compatibilization, Mechanical properties, MORPHOLOGY, Poly(amide) 1010-PA1010, Poly(ethyelene terephthalate)-PET, Xibond™ 920Autores:Balart R., Diego Lascano, Jorda M., Montanes N., Montava-Jorda S., Quiles‐carrillo L.Fuentes:scopusKinetic analysis of the curing of a partially biobased epoxy resin using dynamic differential scanning calorimetry
ArticleAbstract: This research presents a cure kinetics study of an epoxy system consisting of a partially bio-sourcePalabras claves:Bio-sourced epoxy resin, Cure kinetics, Differential scanning calorimetry (DSC), Epoxy resinAutores:Balart R., Boronat T., Diego Lascano, Montanes N., Quiles‐carrillo L.Fuentes:scopusKinetic analysis of the curing process of biobased epoxy resin from epoxidized linseed oil by dynamic differential scanning calorimetry
ArticleAbstract: The curing process of epoxy resin based on epoxidized linseed oil (ELO) is studied using dynamic difPalabras claves:Biobased epoxy resin, Epoxidized linseed oil, flax, kinetic analysisAutores:Balart R., Diego Lascano, Fombuena V., Lerma‐canto A., Montanes N., Quiles‐carrillo L.Fuentes:scopusStudy of the influence of the reprocessing cycles on the final properties of polylactide pieces obtained by injection molding
ArticleAbstract: This research work aims to study the influence of the reprocessing cycles on the mechanical, thermalPalabras claves:Circular economy, Extrusion cycles, injection molding, Mechanical recycling, PlaAutores:Agüero Á., Balart R., Boronat T., Diego Lascano, Fenollar O., Morcillo M.D.C., Quiles‐carrillo L., Torres-Giner S.Fuentes:scopusManufacturing and characterization of highly environmentally friendly sandwich composites from polylactide cores and flax-polylactide faces
ArticleAbstract: This work focuses on the manufacturing and characterization of highly environmentally friendly lightPalabras claves:Eco-friendly sandwich structures, Hot compression molding, PLA honeycomb core, Three-point bending testAutores:Balart R., Boronat T., Diego Lascano, Guillen-Pineda R., Ivorra-Martínez J., Montanes N., Quiles‐carrillo L.Fuentes:scopusMicroencapsulation of copper(ii) sulfate in ionically cross-linked chitosan by spray drying for the development of irreversible moisture indicators in paper packaging
ArticleAbstract: Copper(II) sulfate-loaded chitosan microparticles were herein prepared using ionic cross-linking witPalabras claves:CELLULOSE, Chitosan, Copper, Humidity sensors, Intelligent packaging, Ionic cross-linking, spray dryingAutores:Balart R., Fages E., Prieto C., Quiles‐carrillo L., Sandra Rojas-Lema, Terol J., Torres-Giner S.Fuentes:scopusPlasticized Mechanical Recycled PLA Films Reinforced with Microbial Cellulose Particles Obtained from Kombucha Fermented in Yerba Mate Waste
ArticleAbstract: In this study, yerba mate waste (YMW) was used to produce a kombucha beverage, and the obtained micrPalabras claves:CELLULOSE, Food packaging, Kombucha, Pla, yerba mateAutores:Abarca de las Muelas S.S., Agüero Á., Balart R., Corral Perianes E., de la Fuente García-Soto M.d.M., Diego Lascano, Patricia Arrieta M., Peltzer M.A.Fuentes:scopus