Mostrando 7 resultados de: 7
Filtros aplicados
Subtipo de publicación
Article(7)
Área temáticas
Fabricación(4)
Ingeniería y operaciones afines(4)
Tecnología de otros productos orgánicos(4)
Textiles(2)
Física aplicada(1)
Origen
scopus(7)
Development of injection-molded polylactide pieces with high toughness by the addition of lactic acid oligomer and characterization of their shape memory behavior
ArticleAbstract: This work reports the effect of the addition of an oligomer of lactic acid (OLA), in the 5-20 wt% raPalabras claves:Impact modifier, OLA, Packaging applications, Pla, Shape memoryAutores:Balart R., Boronat T., Diego Lascano, Ivorra-Martínez J., Moraga G., Quiles‐carrillo L., Sandra Rojas-Lema, Torres-Giner S.Fuentes:scopusOptimization of the curing and post-curing conditions for the manufacturing of partially bio-based epoxy resins with improved toughness
ArticleAbstract: This research deals with the influence of different curing and post-curing temperatures on the mechaPalabras claves:Bio-based thermosets, Gel time, Mechanical properties, Post-curingAutores:Boronat T., Diego Lascano, Montanes N., Quiles‐carrillo L., Torres-Giner S.Fuentes:scopusManufacturing and Characterization of Hybrid Composites with Basalt and Flax Fabrics and a Partially Bio-based Epoxy Resin
ArticleAbstract: This research is focused on manufacturing and characterization of hybrid composite laminates obtainePalabras claves:Bio-based epoxy resin, Hybrid composites laminates, VARIMAutores:Agüero Á., Balart R., Boronat T., Diego Lascano, García-Sanoguera D., Montanes N.Fuentes:scopusManufacturing and characterization of green composites with partially biobased epoxy resin and flaxseed flour wastes
ArticleAbstract: In the present work, green-composites from a partially biobased epoxy resin (BioEP) reinforced withPalabras claves:Biobased epoxy, Flax seed, Green-composite, Size particle, Waste valorizationAutores:Balart R., Boronat T., Diego Lascano, García-García D., Quiles‐carrillo L., Sandra Rojas-LemaFuentes:scopusManufacturing and characterization of highly environmentally friendly sandwich composites from polylactide cores and flax-polylactide faces
ArticleAbstract: This work focuses on the manufacturing and characterization of highly environmentally friendly lightPalabras claves:Eco-friendly sandwich structures, Hot compression molding, PLA honeycomb core, Three-point bending testAutores:Balart R., Boronat T., Diego Lascano, Guillen-Pineda R., Ivorra-Martínez J., Montanes N., Quiles‐carrillo L.Fuentes:scopusManufacturing of composite materials with high environmental efficiency using epoxy resin of renewable origin and permeable light cores for vacuum-assisted infusion molding
ArticleAbstract: This work focuses on the manufacturing and characterization of novel and lightweight hybrid sandwichPalabras claves:flax fibers, Hybrid composite materials, non-woven cores, silane coupling agents, VARIM process, basalt fibersAutores:Balart R., Boronat T., Diego Lascano, Quiles‐carrillo L., Valcárcel J.Fuentes:scopusMechanical recycling of partially bio-based and recycled polyethylene terephthalate blends by reactive extrusion with poly(styrene-co-glycidyl methacrylate)
ArticleAbstract: In the present study, partially bio-based polyethylene terephthalate (bio-PET) was melt-mixed at 15-Palabras claves:Bio-PET, Chain extenders, Food packaging, r-PET, Reactive extrusion, Secondary recyclingAutores:Boronat T., Diego Lascano, Ferrandiz-Bou S., Martinez-Sanz A.V., Montanes N., Montava-Jorda S., Quiles‐carrillo L., Torres-Giner S.Fuentes:scopus