Mostrando 7 resultados de: 7
Filtros aplicados
Subtipo de publicación
Article(7)
Área temáticas
Tecnología de otros productos orgánicos(6)
Ingeniería y operaciones afines(5)
Fabricación(3)
Ingeniería química(3)
Dibujo técnico, materiales peligrosos(1)
Área de conocimiento
Ciencia de materiales(7)
Material compuesto(4)
Polímero(2)
Cinética química(1)
Ingeniería ambiental(1)
Effects of Steam Heat and Dry Heat Sterilization Processes on 3D Printed Commercial Polymers Printed by Fused Deposition Modeling
ArticleAbstract: Fused deposition modeling (FDM), the most widely used additive manufacturing (AM) technology, is gaiPalabras claves:3-D printing, CPE, Dry heat sterilization, FUSED DEPOSITION MODELING, Moist heat sterilization process, PETG, Pla, Single-use surgical devicesAutores:Boronat T., Ferrandiz-Bou S., Jorge Mauricio Fuentes Fuentes, Patricia Arrieta M.Fuentes:googlescopusDevelopment of injection-molded polylactide pieces with high toughness by the addition of lactic acid oligomer and characterization of their shape memory behavior
ArticleAbstract: This work reports the effect of the addition of an oligomer of lactic acid (OLA), in the 5-20 wt% raPalabras claves:Impact modifier, OLA, Packaging applications, Pla, Shape memoryAutores:Balart R., Boronat T., Diego Lascano, Ivorra-Martínez J., Moraga G., Quiles‐carrillo L., Sandra Rojas-Lema, Torres-Giner S.Fuentes:scopusManufacturing and characterization of highly environmentally friendly sandwich composites from polylactide cores and flax-polylactide faces
ArticleAbstract: This work focuses on the manufacturing and characterization of highly environmentally friendly lightPalabras claves:Eco-friendly sandwich structures, Hot compression molding, PLA honeycomb core, Three-point bending testAutores:Balart R., Boronat T., Diego Lascano, Guillen-Pineda R., Ivorra-Martínez J., Montanes N., Quiles‐carrillo L.Fuentes:scopusMechanical recycling of partially bio-based and recycled polyethylene terephthalate blends by reactive extrusion with poly(styrene-co-glycidyl methacrylate)
ArticleAbstract: In the present study, partially bio-based polyethylene terephthalate (bio-PET) was melt-mixed at 15-Palabras claves:Bio-PET, Chain extenders, Food packaging, r-PET, Reactive extrusion, Secondary recyclingAutores:Boronat T., Diego Lascano, Ferrandiz-Bou S., Martinez-Sanz A.V., Montanes N., Montava-Jorda S., Quiles‐carrillo L., Torres-Giner S.Fuentes:scopusKinetic analysis of the curing of a partially biobased epoxy resin using dynamic differential scanning calorimetry
ArticleAbstract: This research presents a cure kinetics study of an epoxy system consisting of a partially bio-sourcePalabras claves:Bio-sourced epoxy resin, Cure kinetics, Differential scanning calorimetry (DSC), Epoxy resinAutores:Balart R., Boronat T., Diego Lascano, Montanes N., Quiles‐carrillo L.Fuentes:scopusOptimization of the curing and post-curing conditions for the manufacturing of partially bio-based epoxy resins with improved toughness
ArticleAbstract: This research deals with the influence of different curing and post-curing temperatures on the mechaPalabras claves:Bio-based thermosets, Gel time, Mechanical properties, Post-curingAutores:Boronat T., Diego Lascano, Montanes N., Quiles‐carrillo L., Torres-Giner S.Fuentes:scopusStudy of the influence of the reprocessing cycles on the final properties of polylactide pieces obtained by injection molding
ArticleAbstract: This research work aims to study the influence of the reprocessing cycles on the mechanical, thermalPalabras claves:Circular economy, Extrusion cycles, injection molding, Mechanical recycling, PlaAutores:Agüero Á., Balart R., Boronat T., Diego Lascano, Fenollar O., Morcillo M.D.C., Quiles‐carrillo L., Torres-Giner S.Fuentes:scopus