Mostrando 5 resultados de: 5
Filtros aplicados
Subtipo de publicación
Article(5)
Dynamic–mechanical and decomposition properties of flax/basalt hybrid laminates based on an epoxidized linseed oil polymer
ArticleAbstract: This contribution focuses on the development of flax and flax/basalt hybrid reinforced composites baPalabras claves:Basalt, Dynamic–mechanical, Epoxidized linseed oil (ELO), flax, Green composites, massAutores:Balart R., Ferrandiz-Bou S., García-García D., José Miguel Ferri, Motoc D.L.Fuentes:scopusNew materials for 3D-printing based on polycaprolactone with gum rosin and beeswax as additives
ArticleAbstract: In this work, different materials for three-dimensional (3D)-printing were studied, which based on pPalabras claves:3D-printing, beeswax, Gum rosin, Natural additives, PolycaprolactoneAutores:Cristina Pavon, Ferrandiz-Bou S., López-Martínez J., Miguel Fernando Aldas CarrascoFuentes:scopusMechanical recycling of partially bio-based and recycled polyethylene terephthalate blends by reactive extrusion with poly(styrene-co-glycidyl methacrylate)
ArticleAbstract: In the present study, partially bio-based polyethylene terephthalate (bio-PET) was melt-mixed at 15-Palabras claves:Bio-PET, Chain extenders, Food packaging, r-PET, Reactive extrusion, Secondary recyclingAutores:Boronat T., Diego Lascano, Ferrandiz-Bou S., Martinez-Sanz A.V., Montanes N., Montava-Jorda S., Quiles‐carrillo L., Torres-Giner S.Fuentes:scopusMechanical, Dynamic-Mechanical, Thermal and Decomposition Behavior of 3D-Printed PLA Reinforced with CaCO<inf>3</inf> Fillers from Natural Resources
ArticleAbstract: This study evaluates the effect of CaCO3 fillers extracted from waste eggshells on 3Dprinted PLA perPalabras claves:3D-printing, biological filler, decomposition, dynamic-mechanical, mechanical, PLA polymer, surface appearance, thermal, WettabilityAutores:Cristina Pavon, Ferrandiz-Bou S., López-Martínez J., María Dolores Samper, Miguel Fernando Aldas Carrasco, Motoc D.L.Fuentes:scopusEffects of Steam Heat and Dry Heat Sterilization Processes on 3D Printed Commercial Polymers Printed by Fused Deposition Modeling
ArticleAbstract: Fused deposition modeling (FDM), the most widely used additive manufacturing (AM) technology, is gaiPalabras claves:3-D printing, CPE, Dry heat sterilization, FUSED DEPOSITION MODELING, Moist heat sterilization process, PETG, Pla, Single-use surgical devicesAutores:Boronat T., Ferrandiz-Bou S., Jorge Mauricio Fuentes Fuentes, Patricia Arrieta M.Fuentes:googlescopus