Mostrando 10 resultados de: 14
Filtros aplicados
Subtipo de publicación
Article(14)
Área temáticas
Tecnología de otros productos orgánicos(9)
Ingeniería y operaciones afines(8)
Fabricación(4)
Ingeniería química(3)
Industria papelera(2)
Área de conocimiento
Ciencia de materiales(12)
Material compuesto(9)
Polímero(3)
Cinética química(2)
Ingeniería ambiental(2)
Origen
scopus(14)
Development and Characterization of Polylactide Blends with Improved Toughness by Reactive Extrusion with Lactic Acid Oligomers
ArticleAbstract: In this work, we report the development and characterization of polylactide (PLA) blends with improvPalabras claves:environmentally friendly, improved toughness, lactic acid oligomer (OLA), maleinized linseed oil (MLO), polylactide (PLA), Reactive extrusionAutores:Diego Lascano, Fiori S., García-Sanoguera D., Gomez-Caturla J., Montanes N., Quiles‐carrillo L., Tejada-Oliveros R.Fuentes:scopusDevelopment of injection-molded polylactide pieces with high toughness by the addition of lactic acid oligomer and characterization of their shape memory behavior
ArticleAbstract: This work reports the effect of the addition of an oligomer of lactic acid (OLA), in the 5-20 wt% raPalabras claves:Impact modifier, OLA, Packaging applications, Pla, Shape memoryAutores:Balart R., Boronat T., Diego Lascano, Ivorra-Martínez J., Moraga G., Quiles‐carrillo L., Sandra Rojas-Lema, Torres-Giner S.Fuentes:scopusFunctionalization of partially bio-based poly(ethylene terephthalate) by blending with fully bio-based poly(amide) 10,10 and a glycidyl methacrylate-based compatibilizer
ArticleAbstract: This work shows the potential of binary blends composed of partially bio-based poly(ethyelene terephPalabras claves:bio-based, compatibilization, Mechanical properties, MORPHOLOGY, Poly(amide) 1010-PA1010, Poly(ethyelene terephthalate)-PET, Xibond™ 920Autores:Balart R., Diego Lascano, Jorda M., Montanes N., Montava-Jorda S., Quiles‐carrillo L.Fuentes:scopusEvaluation of different compatibilization strategies to improve the performance of injection-molded green composite pieces made of polylactide reinforced with short flaxseed fibers
ArticleAbstract: Green composites made of polylactide (PLA) and short flaxseed fibers (FFs) at 20 wt % were successfuPalabras claves:Fiber pretreatment, flax, Green composites, Pla, Reactive extrusionAutores:Agüero Á., Diego Lascano, Fenollar O., García-Sanoguera D., Ivorra-Martínez J., Sandra Rojas-Lema, Torres-Giner S.Fuentes:scopusOptimization of the curing and post-curing conditions for the manufacturing of partially bio-based epoxy resins with improved toughness
ArticleAbstract: This research deals with the influence of different curing and post-curing temperatures on the mechaPalabras claves:Bio-based thermosets, Gel time, Mechanical properties, Post-curingAutores:Boronat T., Diego Lascano, Montanes N., Quiles‐carrillo L., Torres-Giner S.Fuentes:scopusManufacturing and characterization of environmentally friendly wood plastic composites using pinecone as a filler into a bio-based high-density polyethylene matrix
ArticleAbstract: The use of wood plastic composites (WPC) is growing very rapidly in recent years, in addition, the uPalabras claves:Mechanical properties, natural fillers, Pinecone, Polyethylene, Wood plastic compositeAutores:Diego Lascano, García-García D., García-Sanoguera D., Morcillo M.D.C., Tejada R.Fuentes:scopusManufacturing and characterization of functionalized aliphatic polyester from poly(lactic acid) with halloysite nanotubes
ArticleAbstract: This work reports the potential of poly(lactic acid)-PLA composites with different halloysite nanotuPalabras claves:Halloysite nanotubes, Mechanical characterization, MORPHOLOGY, poly(lactic acid), thermal characterizationAutores:Chacon V., Diego Lascano, Montanes N., Montava-Jorda S., Sánchez-Nácher L.Fuentes:scopusManufacturing and characterization of highly environmentally friendly sandwich composites from polylactide cores and flax-polylactide faces
ArticleAbstract: This work focuses on the manufacturing and characterization of highly environmentally friendly lightPalabras claves:Eco-friendly sandwich structures, Hot compression molding, PLA honeycomb core, Three-point bending testAutores:Balart R., Boronat T., Diego Lascano, Guillen-Pineda R., Ivorra-Martínez J., Montanes N., Quiles‐carrillo L.Fuentes:scopusMechanical recycling of partially bio-based and recycled polyethylene terephthalate blends by reactive extrusion with poly(styrene-co-glycidyl methacrylate)
ArticleAbstract: In the present study, partially bio-based polyethylene terephthalate (bio-PET) was melt-mixed at 15-Palabras claves:Bio-PET, Chain extenders, Food packaging, r-PET, Reactive extrusion, Secondary recyclingAutores:Boronat T., Diego Lascano, Ferrandiz-Bou S., Martinez-Sanz A.V., Montanes N., Montava-Jorda S., Quiles‐carrillo L., Torres-Giner S.Fuentes:scopusKinetic analysis of the curing of a partially biobased epoxy resin using dynamic differential scanning calorimetry
ArticleAbstract: This research presents a cure kinetics study of an epoxy system consisting of a partially bio-sourcePalabras claves:Bio-sourced epoxy resin, Cure kinetics, Differential scanning calorimetry (DSC), Epoxy resinAutores:Balart R., Boronat T., Diego Lascano, Montanes N., Quiles‐carrillo L.Fuentes:scopus