Mostrando 10 resultados de: 12
Filtros aplicados
Publisher
Polymers(4)
Composites Part B: Engineering(3)
Polymer Composites(2)
Composites Science and Technology(1)
Materials(1)
Área temáticas
Ingeniería y operaciones afines(8)
Tecnología de otros productos orgánicos(7)
Fabricación(3)
Textiles(3)
Ingeniería química(2)
Objetivos de Desarrollo Sostenible
ODS 12: Producción y consumo responsables(12)
ODS 9: Industria, innovación e infraestructura(12)
ODS 7: Energía asequible y no contaminante(6)
ODS 17: Alianzas para lograr los objetivos(3)
ODS 15: Vida de ecosistemas terrestres(2)
Origen
scopus(12)
Effect of different compatibilizers on injection-molded green fiber-reinforced polymers based on poly(lactic acid)-maleinized linseed oil system and sheep wool
ArticleAbstract: A method to modify polymers is that of introducing fibers in a matrix to produce a fiber-reinforcedPalabras claves:Alkoxide, Compatibilizers, Coupling agent, Fiber reinforced polymer (FRP), Green materials, poly(lactic acid), Silane, WoolAutores:Lopez-Martinez J., María Dolores Samper, Miguel Fernando Aldas Carrasco, Pawlak F.Fuentes:scopusEffect of silane coupling agents on basalt fiber-epoxidized vegetable oil matrix composite materials analyzed by the single fiber fragmentation technique
ArticleAbstract: The fiber-matrix interfacial shear strength (IFSS) of biobased epoxy composites reinforced with basaPalabras claves:Autores:Balart R., Kenny J.M., María Dolores Samper, Petrucci R., Sánchez-Nácher L.Fuentes:scopusDevelopment and characterization of a new natural fiber reinforced thermoplastic (NFRP) with Cortaderia selloana (Pampa grass) short fibers
ReviewAbstract: In this work, fully bio-based thermoplastic composites are manufactured with bio-based polyethylenePalabras claves:Bio-based polyethylene, Cortaderia selloana, Mechanical properties, Natural fiber reinforced plastics (NFRP)Autores:Carbonell-Verdu A., García-Sanoguera D., Jorda-Vilaplana A., María Dolores Samper, Pop A.Fuentes:scopusDevelopment of slate fiber reinforced high density polyethylene composites for injection molding
ArticleAbstract: During the last decade the use of fiber reinforced composite materials has consolidated as an attracPalabras claves:A. Fibres, B. Mechanical properties, B. Microstructures, E. Injection molding, E. Thermoplastic resinAutores:Balart R., Carbonell-Verdu A., García-García D., Jordá A., María Dolores SamperFuentes:scopusGreen composites based on polypropylene matrix and hydrophobized spend coffee ground (SCG) powder
ArticleAbstract: Green composites were prepared with polypropylene matrix and 20 wt.% spent coffee ground (SCG) powdePalabras claves:A. Polymer-matrix composites (PMCs), B. Adhesion, B. Wettability, D. Thermal analysis-Spent coffee ground (SCG)Autores:Balart R., Carbonell A., García-García D., García-Sanoguera D., María Dolores SamperFuentes:scopusImproved toughness in lignin/natural fiber composites plasticized with epoxidized and maleinized linseed oils
ArticleAbstract: The use of maleinized (MLO) and epoxidized (ELO) linseed oils as potential biobased plasticizers forPalabras claves:Arboform, Epoxidized oil, Maleinized linseed oil, Thermal stability, TOUGHNESSAutores:Carbonell-Verdu A., Dominici F., López-Martínez J., Luzi F., María Dolores Samper, Puglia D., Torre L.Fuentes:scopusEpoxidized and Maleinized Hemp Oil to Develop Fully Bio-Based Epoxy Resin Based on Anhydride Hardeners
ArticleAbstract: The present work aims to develop thermosetting resins using epoxidized hemp oil (EHO) as a bio-basedPalabras claves:crosslinking, cyclic anhydrides, epoxidized hemp seed oil, vegetable oilsAutores:Dominguez‐candela I., Fombuena V., García-García D., Lerma‐canto A., María Dolores SamperFuentes:scopusInvestigation of the effect of different silane coupling agents on mechanical performance of basalt fiber composite laminates with biobased epoxy matrices
ArticleAbstract: In recent years, it has been detected an increased interest in the development of materials from renPalabras claves:Autores:Balart R., España J.M., Fages E., María Dolores Samper, Sánchez-Nácher L.Fuentes:scopusMechanical, Dynamic-Mechanical, Thermal and Decomposition Behavior of 3D-Printed PLA Reinforced with CaCO<inf>3</inf> Fillers from Natural Resources
ArticleAbstract: This study evaluates the effect of CaCO3 fillers extracted from waste eggshells on 3Dprinted PLA perPalabras claves:3D-printing, biological filler, decomposition, dynamic-mechanical, mechanical, PLA polymer, surface appearance, thermal, WettabilityAutores:Cristina Pavon, Ferrandiz-Bou S., López-Martínez J., María Dolores Samper, Miguel Fernando Aldas Carrasco, Motoc D.L.Fuentes:scopusProperties of composite laminates based on basalt fibers with epoxidized vegetable oils
ArticleAbstract: This paper deals with the development of polymeric materials derived from epoxidized vegetable oilsPalabras claves:Basalt fibers, Epoxidized vegetable oils, Mechanical characterization, SilanesAutores:Balart R., Kenny J.M., María Dolores Samper, Petrucci R., Sánchez-Nácher L.Fuentes:scopus