Mostrando 5 resultados de: 5
Filtros aplicados
Subtipo de publicación
Article(5)
Área temáticas
Ingeniería y operaciones afines(3)
Tecnología de otros productos orgánicos(3)
Fabricación(2)
Tecnologías de limpieza, color y recubrimiento(2)
Ingeniería química(1)
Origen
scopus(5)
Development of slate fiber reinforced high density polyethylene composites for injection molding
ArticleAbstract: During the last decade the use of fiber reinforced composite materials has consolidated as an attracPalabras claves:A. Fibres, B. Mechanical properties, B. Microstructures, E. Injection molding, E. Thermoplastic resinAutores:Balart R., Carbonell-Verdu A., García-García D., Jordá A., María Dolores SamperFuentes:scopusGreen composites based on polypropylene matrix and hydrophobized spend coffee ground (SCG) powder
ArticleAbstract: Green composites were prepared with polypropylene matrix and 20 wt.% spent coffee ground (SCG) powdePalabras claves:A. Polymer-matrix composites (PMCs), B. Adhesion, B. Wettability, D. Thermal analysis-Spent coffee ground (SCG)Autores:Balart R., Carbonell A., García-García D., García-Sanoguera D., María Dolores SamperFuentes:scopusEffect of silane coupling agents on basalt fiber-epoxidized vegetable oil matrix composite materials analyzed by the single fiber fragmentation technique
ArticleAbstract: The fiber-matrix interfacial shear strength (IFSS) of biobased epoxy composites reinforced with basaPalabras claves:Autores:Balart R., Kenny J.M., María Dolores Samper, Petrucci R., Sánchez-Nácher L.Fuentes:scopusNew environmentally friendly composite laminates with epoxidized linseed oil (ELO) and slate fiber fabrics
ArticleAbstract: This work focuses on the development of new composite laminates based on the use of epoxidized linsePalabras claves:A. Fabrics/textiles, A. Laminates, B. Mechanical properties, E. Resin Transfer Molding (RTM), E. Surface treatmentsAutores:Balart R., Kenny J.M., María Dolores Samper, Petrucci R., Sánchez-Nácher L.Fuentes:scopusProperties of composite laminates based on basalt fibers with epoxidized vegetable oils
ArticleAbstract: This paper deals with the development of polymeric materials derived from epoxidized vegetable oilsPalabras claves:Basalt fibers, Epoxidized vegetable oils, Mechanical characterization, SilanesAutores:Balart R., Kenny J.M., María Dolores Samper, Petrucci R., Sánchez-Nácher L.Fuentes:scopus