Mostrando 10 resultados de: 43
Filtros aplicados
Publisher
IOP Conference Series: Earth and Environmental Science(5)
Ecuador: Latacunga: Universidad Técnica de Cotopaxi: UTC.(3)
51st AIAA/SAE/ASEE Joint Propulsion Conference(2)
ASME Press(1)
ASME/JSME/KSME 2015 Joint Fluids Engineering Conference, AJKFluids 2015(1)
Área temáticas
Otras ramas de la ingeniería(18)
Ingeniería y operaciones afines(8)
Mecánica de fluidos(5)
Métodos informáticos especiales(5)
Ciencias de la computación(4)
Characterization of energy vectors, in solar water heaters with PCMs for social interest housing
Conference ObjectAbstract: This project seeks to optimize the use of energy vectors that are part of solar collectors, increasiPalabras claves:Autores:Álvaro G. Aguinaga, Ávila-Vega C.F., Estefanía Orquera, Víctor Hugo Hidalgo DíazFuentes:scopusBearing fault diagnosis based on ensemble empirical mode decomposition and teager energy operator
Conference ObjectAbstract: In bearing fault diagnosis, impulse periodic signals are associated with the presence of faults. ThiPalabras claves:bearing fault diagnosis, ensemble empirical mode decomposition, Teager energy operatorAutores:Cong F., López C., Víctor Hugo Hidalgo Díaz, Zhong W.Fuentes:googlescopusBenefits of hydropower research in Ecuador using OpenFOAM based on CFD technology
OtherAbstract: Large eddy simulation model (LES) and the open source OpenFOAM are used in the present numerical stuPalabras claves:Autores:Víctor Hugo Hidalgo DíazFuentes:googleAnalysis of applicability of cfd numerical studies applied to problem when pump working as turbine
ArticleAbstract: The present research depicts an analysis of the implementation of computational fluid dynamics (CFD)Palabras claves:Centrifugal Pump, Computational Fluid Dynamics, pump as turbine, Rotational speed, Variable speedAutores:Frank A. Plua, López-Jiménez P.A., Pérez-Sánchez M., Víctor Hugo Hidalgo DíazFuentes:scopusA CAD-free methodology for volume and mass properties computation of 3-D lifting surfaces and wing-box structures
ArticleAbstract: The geometry, volume, and mass properties (GVM) of lifting surfaces and wing box structures play anPalabras claves:3-d modeling, Aircraft design, CAD-free, Geometry discretization, Lifting surface CAD/CAE, Volume and mass computationAutores:Darío A. Rodríguez, Esteban Valencia, Víctor H. Alulema, Víctor Hugo Hidalgo DíazFuentes:scopusDevelopment of a programming code for image processing of nodular cast iron
Conference ObjectAbstract: This study focuses on the development of a code to perform an appropriate analysis of nodular cast iPalabras claves:digital image processing, Nodular cast iron, Nodularity, OPENCV, PYTHONAutores:Anibal Silva, Carlos W. Díaz-Campoverde, Esteban Valencia, José Erazo, Víctor Hugo Hidalgo DíazFuentes:scopusCavitating flow simulation with mesh development using Salome open source software
OtherAbstract: Cavitating flow simulation is very helpful for understanding the mechanism of cavitation in turbomacPalabras claves:Autores:Víctor Hugo Hidalgo DíazFuentes:googleCavitation simulation with consideration of the viscous effect at large liquid temperature variation
ArticleAbstract: The phase change due to cavitation is not only driven by the pressure difference between the local pPalabras claves:Autores:Hak K.S., Huang R.F., Ji B., Luo X.W., Víctor Hugo Hidalgo Díaz, Yu A.Fuentes:googlescopusApplication of vortex process to cleaner energy generation
Conference ObjectAbstract: The vortex process generated Mechanical energy; this is produced when heat is carried upward by convPalabras claves:Solar chimney, solar energy, Vortex atmospheric engine, Wind turbineAutores:Ning C., Víctor Hugo Hidalgo DíazFuentes:googlescopusDesarrollo de metodologías para la optimización de turbinas hidráulicas
OtherAbstract: En Ecuador el 62, 51% de la potencia efectiva en generación de energía eléctrica corresponde a centrPalabras claves:Autores:Víctor Hugo Hidalgo DíazFuentes:google