Mostrando 10 resultados de: 10
Filtros aplicados
Publisher
Journal of the European Ceramic Society(3)
Ceramic Engineering and Science Proceedings(2)
Chemical Vapor Deposition(1)
Colloids and Interface Science Communications(1)
Key Engineering Materials(1)
Área temáticas
Ingeniería y operaciones afines(8)
Tecnología de otros productos orgánicos(3)
Ingeniería química(2)
Imprenta y actividades conexas(1)
Metalurgia(1)
Application of the chemical vapor infiltration and reaction (CVI-R) technique for the preparation of highly porous biomorphic siC ceramics derived from paper
ArticleAbstract: Chemical vapor infiltration and reaction (CVI-R) is used to produce biomorphic high porous SiC ceramPalabras claves:Biomorphic ceramics, CVI-R, fibers, Microstructure, paper, SiCAutores:Daniela Almeida Streitwieser, Emig G., Gerhard H., Popovska N.Fuentes:scopusGas phase processing of porous, biomorphous TiC-ceramics
Conference ObjectAbstract: Specimens of natural pine wood were converted into biomorphous TiC-ceramics by CVI-R processing (chePalabras claves:Biomorphous ceramics, Biotemplating, Porous ceramics, ticAutores:Daniela Almeida Streitwieser, Gerhard H., Popovska N., Sieber H., Zollfrank C.Fuentes:scopusFast synthesis of silver colloids with a low-cost 3D printed photo-reactor
ArticleAbstract: Herein, a low-cost 3D printed photo-reactor system for the photo-chemical synthesis of silver nanopaPalabras claves:3D Printing, Milli-fluidic devices, Photo-aggregation, Photo-irradiation, silver nanoparticlesAutores:Daniela Almeida Streitwieser, Debut Alexis, Diego Sebastian, Karla Sofía Vizuete Armendáriz, Karla Vizuete, Mateo HernandezFuentes:googlescopusKinetic analysis of the chemical vapor deposition of si from SiCl <inf>4</inf> - H<inf>2</inf> for the production of biomorphic Si <inf>3</inf>N<inf>4</inf> ceramics
Conference ObjectAbstract: Biomorphic porous Si3N4 ceramics derived from paper were produced in a three step process consistingPalabras claves:Autores:Daniela Almeida Streitwieser, Ghanem H., Popovska N.Fuentes:scopusKinetic analysis of the processing of porous biomorphic titanium carbide ceramics by chemical vapor infiltration
ArticleAbstract: Porous biomorphic TiC ceramics derived from three different wood types-beech, pine, and rattan-werePalabras claves:CVI, Infiltration model, Porous TiC ceramics, woodAutores:Daniela Almeida Streitwieser, Gerhard H., Popovska N., Sieber H., Xu C.Fuentes:scopusProcessing of biomorphous SIC ceramics from paper preforms by Chemical Vapor infiltration and reaction (CVI-R) technique
Conference ObjectAbstract: Chemical Vapor Infiltration and Reaction (CVI-R) technique is used to produce biomorphic high porousPalabras claves:Autores:Daniela Almeida Streitwieser, Emig G., Gerhard H., Popovska N.Fuentes:scopusProcessing of porous biomorphic TiC ceramics by chemical vapor infiltration and reaction (CVI-R) technique
Conference ObjectAbstract: Chemical vapor infiltration and reaction (CVI-R) is used for producing biomorphic porous TiC ceramicPalabras claves:Autores:Daniela Almeida Streitwieser, Gerhard H., Popovska N., Sieber H., Xu C.Fuentes:scopusOptimization of the ceramization process for the production of three-dimensional biomorphic porous SiC ceramics by chemical vapor infiltration (CVI)
ArticleAbstract: The ceramization process for the preparation of three-dimensional (3D) biomorphic porous SiC ceramicPalabras claves:Biomorphic ceramics, Chemical vapour infiltration, films, Mechanical properties, Porosity, SiCAutores:Daniela Almeida Streitwieser, Gerhard H., Popovska N.Fuentes:scopusPaper derived biomorphic porous titanium carbide and titanium oxide ceramics produced by chemical vapor infiltration and reaction (CVI-R)
ArticleAbstract: Chemical vapor infiltration (CVI) is used for producing biomorphic porous TiC ceramics derived fromPalabras claves:Biomorphic ceramics, Chemical vapor infiltration, Porous ceramics, ticAutores:Daniela Almeida Streitwieser, Gerhard H., Popovska N., Xu C.Fuentes:scopusSimple Preparation of Metal-Impregnated FDM 3D-Printed Structures
ArticleAbstract: Modifying the natural characteristics of PLA 3D-printed models is of interest in various research arPalabras claves:3D-printing, FDM, metal impregnation, silver nanoparticlesAutores:Daniela Almeida Streitwieser, Debut Alexis, Diana Flores, Diego Sebastian, José Noboa, Karla Vizuete, Lorena Bejarano M., Mickaela TarapuesFuentes:scopus