Mostrando 10 resultados de: 10
Filtros aplicados
Publisher
2016 IEEE Ecuador Technical Chapters Meeting, ETCM 2016(2)
Lecture Notes in Networks and Systems(2)
Advances in Intelligent Systems and Computing(1)
Boletin Tecnico/Technical Bulletin(1)
CHILECON 2015 - 2015 IEEE Chilean Conference on Electrical, Electronics Engineering, Information and Communication Technologies, Proceedings of IEEE Chilecon 2015(1)
Área temáticas
Fisiología humana(4)
Ingeniería y operaciones afines(4)
Física aplicada(3)
Salud y seguridad personal(3)
Enfermedades(2)
Área de conocimiento
Factores humanos y ergonomía(4)
Biomateriales(1)
Energía(1)
Estudios culturales(1)
Ingeniería energética(1)
Origen
google(10)
Determination of converge parameters for Monte Carlo experiments in the simulation of the failure of bone tissue
Conference ObjectAbstract: The Monte Carlo method is widely used in the field of biomechanics to study the variability of diverPalabras claves:bone failure, confidence level, convergence criterion, Monte CarloAutores:Casanova-Medina E., Ing. Thalía San Antonio, PhD., Marco A. Ciaccia Sortino, Müller-Karger C., Thalía San AntonioFuentes:googlescopusErgonomic analysis for people with physical disabilities when the wheelchair is considered as their workstation
Conference ObjectAbstract: An ergonomic study was performed using the RULA and MAPFRE methods, the assessment is centered on thPalabras claves:Ergonomics, MAPFRE wheelchair, Physical disability, RULAAutores:Anita Larrea, Fernando Urrutia Urrutia, Ing. Thalía San Antonio, PhD., Thalía San AntonioFuentes:googlescopusErgonomic evaluation of risk level by exposure to forced postures in cattle slaughterhouse workers in Ecuador
Conference ObjectAbstract: Nowadays, worldwide work related musculoskeletal disorders are considered a serious public health prPalabras claves:Forced postures, REBA, Risk level, RULAAutores:Alejandra Lascano, Anita Larrea, Gustavo Patín, Ing. Thalía San Antonio, PhD., Thalía San AntonioFuentes:googlescopusEstimation of Spine Loads During Daily Activities and Its Relationship with Musculoskeletal Disorders in Elderly Indigenous Women
Conference ObjectAbstract: This investigation aims to establish a correlation between spine deformations in indigenous elderlyPalabras claves:Daily activities, INDIGENOUS WOMEN, Low back compression force, Work-related injuriesAutores:Alejandra Lascano, Anita Larrea, David Guevara Guevara, David Omar Guevara Aulestia, Ing. Thalía San Antonio, PhD., Thalía San AntonioFuentes:googlescopusOrientation of orthotropic material properties in a femur FE model: A method based on the principal stresses directions
ArticleAbstract: Most work done on bone simulation has modeled the tissue as inhomogeneous and isotropic even thoughPalabras claves:Orthotropic axes orientation, Principal stress, proximal femur, Subject-specific bone FE model, Wolff's lawAutores:Casanova-Medina E., Ing. Thalía San Antonio, PhD., Marco A. Ciaccia Sortino, Müller-Karger C., Thalía San AntonioFuentes:googlescopusImplementation of a methodology to perform an energy audit with academic purpose
ArticleAbstract: This article proposes a standard methodology to implement a detailed energy audit as a tool to quantPalabras claves:Consumption optimization, energy audit, Energy efficiencyAutores:Diego Salazar Garces, E. F. Viera, Ing. Thalía San Antonio, PhD., Mayra A. Paucar, Mayra Paucar Samaniego, P. I. Amancha, Thalía San AntonioFuentes:googlescopusImplementing Participatory Ergonomics Among Indigenous Women of Ecuador to Preserve Ancestral Customs and Knowledge
Conference ObjectAbstract: Severe spine deformations are common among elderly indigenous women of Ecuadorian highlands mainly dPalabras claves:INDIGENOUS WOMEN, Participatory ergonomics, Spine deformationsAutores:Alejandra Lascano, Fernando Urrutia Urrutia, Ing. Thalía San Antonio, PhD., María Augusta Latta, Thalía San AntonioFuentes:googlescopusInfluence of modelling boundary conditions in the simulation of mechanical tests of bovine bones
ArticleAbstract: The aim of this work is to study the influence of different configurations of boundary conditions inPalabras claves:Bone models, bone tissue, boundary conditions, Finite element simulation, Mechanical testsAutores:Casanova-Medina E., Ing. Thalía San Antonio, PhD., Marco A. Ciaccia Sortino, Müller-Karger C., Thalía San AntonioFuentes:googlescopusMethodology to incorporate non-isotropic bone properties in a finite element model
ArticleAbstract: Most of the finite element models found in the literature assumes that the mechanical behavior of thPalabras claves:Bone model, bone tissue, FEM, Transversally isotropic materialAutores:Casanova-Medina E., Ing. Thalía San Antonio, PhD., Marco A. Ciaccia Sortino, Müller-Karger C., Thalía San AntonioFuentes:googlescopusUser centered design of a wheelchair based in an anthropometric study
Conference ObjectAbstract: In order to propose a wheelchairs user centered design an anthropometric study is performed in the pPalabras claves:Anthropometry, Disability, User Centered Design, wheelchairAutores:Fernando Urrutia Urrutia, Ing. Thalía San Antonio, PhD., Jéssica López, María Augusta Latta, Paola Ortíz Villalba, Pilar Urrutia-Urrutia, Thalía San AntonioFuentes:googlescopus