Mostrando 10 resultados de: 10
Filtros aplicados
Publisher
Journal of Cellular Plastics(2)
Materials Science Forum(2)
Annual Technical Conference - ANTEC, Conference Proceedings(1)
Cellular Polymers(1)
Journal of Materials Processing Technology(1)
Density Gradients, Cellular Structure and Thermal Conductivity of High-Density Polyethylene Foams by Different Amounts of Chemical Blowing Agent
ArticleAbstract: LDPE (low-density polyethylene) foams were prepared using the improved compression moulding techniquPalabras claves:cellular structure, density gradients, improved compression moulding, LDPE, polymer foams, thermal conductivity, transient plane source methodAutores:Juan Lobos Martin, Rodriguez-Perez M.A., Saravana Prakash ThirumuruganandhamFuentes:googlescopusHow much do nanoparticle fillers improve the modulus and strength of polymer foams?
ReviewAbstract: Nanofiller reinforcing agents can significantly improve the strength and modulus of polymer foams. BPalabras claves:filler, Foam, polyurethane, porous, thermoplasticAutores:Juan Lobos Martin, Velankar S.S.Fuentes:googlescopusImproving the thermal insulation of polystyrene foams by the addition of carbon black
Conference ObjectAbstract: This paper presents an investigation on the improvement of the thermal conductivity of polystyrene fPalabras claves:Carbon black, Foam, Polystyrene, thermal conductivityAutores:Gasa G., Juan Lobos Martin, Muñoz M., Rodriguez-Perez M.A.Fuentes:scopusImproving thermoplastic foam stability in the molten state by interfacially-adsorbed particles
Conference ObjectAbstract: Addition of particles of low surface energy is shown to have a strong stabilizing effect on polymerPalabras claves:ANTEC, Foam stabilization, Foams, INTERFACE, Particles, Pla, Ps, PTFEAutores:Cellular M.A.R.P., Iasella S., Juan Lobos Martin, Velankar S.S.Fuentes:scopusMechanical behaviour at low strains of LDPE foams with cell sizes in the microcellular range: Advantages of using these materials in structural elements
ArticleAbstract: This paper presents the production method and the compressive meclianical response at low strains foPalabras claves:Autores:De Saja J.A., Del Carpió B.M.A., Gonzalez L., Juan Lobos Martin, Perez-Muñoz C.A., Rodriguez-Perez M.A.Fuentes:googlescopusMechanical behaviour of high density polyethylene based foams
Conference ObjectAbstract: This paper presents the mechanical properties of a collection of high density Polyethylene based foaPalabras claves:Mechanical properties, Microfoam, No-crosslinking foams, PE foam, Polyetilene, Recyclable PE foams, Young's modulusAutores:De Saja J.A., Del Carpio M., Juan Lobos Martin, Rodriguez-Perez M.A.Fuentes:googlescopusMechanical response of polyethylene foams with high densities and cell sizes in the microcellular range
ArticleAbstract: This article presents the compressive mechanical response at low strains for a collection of polyethPalabras claves:Mechanical properties, Microcellular foams, Polyethylene foamsAutores:De Saja J.A., Juan Lobos Martin, Perez-Mũoz C.A., Rodriguez-Perez M.A.Fuentes:googlescopusStrengthening of lotus-type porous copper by ECAE process
ArticleAbstract: Lotus-type porous copper with directional cylindrical pores was fabricated by unidirectional solidifPalabras claves:Equal-channel angular extrusion, Lotus-type porous copper, Porous metals, Vickers hardness, Yield strengthAutores:Juan Lobos Martin, Nakajima H., Rodriguez-Perez M.A., Suzuki S., Utsunomiya H.Fuentes:googlescopusStructural change and improvement of the mechanical properties of a lotus-type porous copper by wire-brushing
Conference ObjectAbstract: The surface of lotus-type porous copper plates that had cylindrical open pores in the thickness direPalabras claves:Autores:Fujii H., Ji Y., Juan Lobos Martin, Nakajima H., Suzuki S., Terada D., Tsuji N.Fuentes:googlescopusStructure change and improvement of the mechanical properties of lotus-type porous copper by ECAE process
Conference ObjectAbstract: Deformation behavior of lotus-type porous copper with long cylindrical pores aligned in one directioPalabras claves:ECAE, Lotus copper, Porous metals, Severe plastic deformation, Vickers hardness, Yield strengthAutores:Juan Lobos Martin, Nakajima H., Suzuki S., Utsunomiya H.Fuentes:googlescopus