Mostrando 10 resultados de: 11
Filtros aplicados
Publisher
Journal of Cellular Plastics(2)
Materials Science Forum(2)
Acta Microscopica(1)
Cellular Polymers(1)
Journal of Chemical and Engineering Data(1)
Área temáticas
Ingeniería y operaciones afines(8)
Metalurgia y productos metálicos primarios(4)
Tecnología de otros productos orgánicos(3)
Construcción de edificios(2)
Ingeniería química(2)
Área de conocimiento
Ciencia de materiales(9)
Polímero(6)
Biotecnología(1)
Ingeniería química(1)
Material compuesto(1)
Origen
scopus(11)
Density Gradients, Cellular Structure and Thermal Conductivity of High-Density Polyethylene Foams by Different Amounts of Chemical Blowing Agent
ArticleAbstract: LDPE (low-density polyethylene) foams were prepared using the improved compression moulding techniquPalabras claves:cellular structure, density gradients, improved compression moulding, LDPE, polymer foams, thermal conductivity, transient plane source methodAutores:Juan Lobos Martin, Rodriguez-Perez M.A., Saravana Prakash ThirumuruganandhamFuentes:googlescopusGraphene functionalized with partially deacetylated chitin extracted from shrimp shell waste
ArticleAbstract: The understanding of the interaction between graphene with chitinous polymers remains a challenge. HPalabras claves:chitin, Chitosan, Graphene, nanocomposite, NanoparticlesAutores:alex jamett, Bernardo Guerrero-Rodríguez, C. Berrezueta-Palacios, Juan Lobos Martin, L. Layana, S. Cortez-Gómez, Sarah BriceñoFuentes:googlescopusHow much do nanoparticle fillers improve the modulus and strength of polymer foams?
ReviewAbstract: Nanofiller reinforcing agents can significantly improve the strength and modulus of polymer foams. BPalabras claves:filler, Foam, polyurethane, porous, thermoplasticAutores:Juan Lobos Martin, Velankar S.S.Fuentes:googlescopusImproving the stability of polylactic acid foams by interfacially adsorbed particles
ArticleAbstract: Polymers such as poly(lactic acid) (PLA), which have poor melt strength, are difficult to foam due tPalabras claves:Autores:Iasella S., Juan Lobos Martin, Rodriguez-Perez M.A., Velankar S.S.Fuentes:googlescopusMechanical behaviour at low strains of LDPE foams with cell sizes in the microcellular range: Advantages of using these materials in structural elements
ArticleAbstract: This paper presents the production method and the compressive meclianical response at low strains foPalabras claves:Autores:De Saja J.A., Del Carpió B.M.A., Gonzalez L., Juan Lobos Martin, Perez-Muñoz C.A., Rodriguez-Perez M.A.Fuentes:googlescopusMechanical behaviour of high density polyethylene based foams
Conference ObjectAbstract: This paper presents the mechanical properties of a collection of high density Polyethylene based foaPalabras claves:Mechanical properties, Microfoam, No-crosslinking foams, PE foam, Polyetilene, Recyclable PE foams, Young's modulusAutores:De Saja J.A., Del Carpio M., Juan Lobos Martin, Rodriguez-Perez M.A.Fuentes:googlescopusMechanical response of polyethylene foams with high densities and cell sizes in the microcellular range
ArticleAbstract: This article presents the compressive mechanical response at low strains for a collection of polyethPalabras claves:Mechanical properties, Microcellular foams, Polyethylene foamsAutores:De Saja J.A., Juan Lobos Martin, Perez-Mũoz C.A., Rodriguez-Perez M.A.Fuentes:googlescopusStrengthening of lotus-type porous copper by ECAE process
ArticleAbstract: Lotus-type porous copper with directional cylindrical pores was fabricated by unidirectional solidifPalabras claves:Equal-channel angular extrusion, Lotus-type porous copper, Porous metals, Vickers hardness, Yield strengthAutores:Juan Lobos Martin, Nakajima H., Rodriguez-Perez M.A., Suzuki S., Utsunomiya H.Fuentes:googlescopusStructural change and improvement of the mechanical properties of a lotus-type porous copper by wire-brushing
Conference ObjectAbstract: The surface of lotus-type porous copper plates that had cylindrical open pores in the thickness direPalabras claves:Autores:Fujii H., Ji Y., Juan Lobos Martin, Nakajima H., Suzuki S., Terada D., Tsuji N.Fuentes:googlescopusStructure change and improvement of the mechanical properties of lotus-type porous copper by ECAE process
Conference ObjectAbstract: Deformation behavior of lotus-type porous copper with long cylindrical pores aligned in one directioPalabras claves:ECAE, Lotus copper, Porous metals, Severe plastic deformation, Vickers hardness, Yield strengthAutores:Juan Lobos Martin, Nakajima H., Suzuki S., Utsunomiya H.Fuentes:googlescopus