Mostrando 10 resultados de: 16
Filtros aplicados
Subtipo de publicación
Article(16)
Publisher
Polymers(7)
Journal of Applied Polymer Science(2)
Clean Technologies(1)
Environmental Technology and Innovation(1)
Foods(1)
Área temáticas
Tecnología de otros productos orgánicos(10)
Ingeniería y operaciones afines(7)
Textiles(3)
Metalurgia y productos metálicos primarios(2)
Cuero y peletería(1)
Comparative characterization of gum rosins for their use as sustainable additives in polymeric matrices
ArticleAbstract: There is a growing interest in the use of non-polluting compounds, which come from renewable sourcesPalabras claves:Biomaterials, Differential scanning calorimetry, Gas chromatography, Gum rosin, Resins, thermogravimetric analysisAutores:Cristina Pavon, Hernández-Fernández J., López-Martínez J., Miguel Fernando Aldas CarrascoFuentes:scopusBilayer films of poly(ε-caprolactone) electrosprayed with gum rosin microspheres: Processing and characterization
ArticleAbstract: Bilayer systems, consisting of electrosprayed gum rosin microspheres (eGR) and poly(ε-caprolactone)Palabras claves:Bilayer, Electrospraying, Gum rosin, Microspheres, Poly(ε-caprolactone)Autores:Cristina Pavon, De-La-Rosa-Ramírez H., López-Martínez J., María Dolores Samper, Miguel Fernando Aldas Carrasco, Patricia Arrieta M.Fuentes:scopusDeposition of gum rosin microspheres on polypropylene microfibres used in face masks to enhance their hydrophobic behaviour
ArticleAbstract: The present study aims to investigate the effects of gum rosin (GR) microspheres coating over the hyPalabras claves:Coating, covid-19, Electrospraying, Face mask, Gum rosin, PolypropyleneAutores:Cristina Pavon, López-Martínez J., Miguel Fernando Aldas Carrasco, Patricia Arrieta M., Rayon E.Fuentes:scopusFilms based on mater-bi® compatibilized with pine resin derivatives: Optical, barrier, and disintegration properties
ArticleAbstract: Mater-Bi® NF866 (MB) was blended with gum rosin and two pentaerythritol esters of gum rosin (labeledPalabras claves:Biodegradable, colophony, Compostable, Gum rosin, Pentaerythritol esters of gum rosin, Pine resin, Thermoplastic starchAutores:Cristina Pavon, José Miguel Ferri, López-Martínez J., Miguel Fernando Aldas Carrasco, Patricia Arrieta M.Fuentes:scopusFilms based on thermoplastic starch blended with pine resin derivatives for food packaging
ArticleAbstract: Completely biobased and biodegradable thermoplastic starch (TPS) based materials with a tunable perfPalabras claves:bioplastic, Disintegration, Gum rosin, Packaging, Pine resin, Thermoplastic starchAutores:Cristina Pavon, Hernández-Fernández J., López-Martínez J., Miguel Fernando Aldas Carrasco, Patricia Arrieta M.Fuentes:scopusEffect of Maleinized Linseed Oil (MLO) on thermal and rheolological properties of PLA/MWCNT and PLA/HNT nanocomposites for additive manufacturing
ArticleAbstract: Purpose: This paper aims to describe the influence of maleinized linseed oil (MLO), when used as a lPalabras claves:3D Printing, additive manufacturing, carbon nanotubes, Halloysite nanotubes, Maleinized linseed oil, Polylactic acid, Rheological, thermalAutores:Christian Mauricio Cobos, Fenollar O., Ferrandiz-Bou S., Garzón L., López-Martínez J., Luis Eduardo Garzón MuñozFuentes:googlescopusNew materials for 3D-printing based on polycaprolactone with gum rosin and beeswax as additives
ArticleAbstract: In this work, different materials for three-dimensional (3D)-printing were studied, which based on pPalabras claves:3D-printing, beeswax, Gum rosin, Natural additives, PolycaprolactoneAutores:Cristina Pavon, Ferrandiz-Bou S., López-Martínez J., Miguel Fernando Aldas CarrascoFuentes:scopusGum rosin as a size control agent of poly(Butylene adipate-co-terephthalate) (pbat) domains to increase the toughness of packaging formulations based on polylactic acid (pla)
ArticleAbstract: Gum rosin (GR) was used as a natural additive to improve the compatibility between polylactic acid,Palabras claves:Barrier properties, Biodegradable polymers, Gum rosin, PBAT, Pla, Poly(butylene adipate-co-terephthalate, Polylactic acidAutores:José Miguel Ferri, López-Martínez J., Miguel Fernando Aldas Carrasco, Motoc D.L., Patricia Arrieta M., Peponi L.Fuentes:scopusImproved toughness in lignin/natural fiber composites plasticized with epoxidized and maleinized linseed oils
ArticleAbstract: The use of maleinized (MLO) and epoxidized (ELO) linseed oils as potential biobased plasticizers forPalabras claves:Arboform, Epoxidized oil, Maleinized linseed oil, Thermal stability, TOUGHNESSAutores:Carbonell-Verdu A., Dominici F., López-Martínez J., Luzi F., María Dolores Samper, Puglia D., Torre L.Fuentes:scopusImprovement of pbat processability and mechanical performance by blending with pine resin derivatives for injection moulding rigid packaging with enhanced hydrophobicity
ArticleAbstract: Polybutylene adipate-co-terephthalate (PBAT) is a biodegradable polymer with good features for packaPalabras claves:blends, Compatibility effect, Gum rosin, hydrophobicity, Packaging, Pine resin, Plasticizing effect, Polybutylene adipate-co-terephthalate (PBAT)Autores:Cristina Pavon, De-La-Rosa-Ramírez H., López-Martínez J., Miguel Fernando Aldas Carrasco, Patricia Arrieta M.Fuentes:scopus