Mostrando 6 resultados de: 6
Filtros aplicados
Subtipo de publicación
Article(6)
Área temáticas
Ingeniería y operaciones afines(2)
Otros productos finales y envases(2)
Tecnología de otros productos orgánicos(2)
Textiles(2)
Dirección general(1)
A new bio-based fibre-reinforced polymer obtained from sheep wool short fibres and PLA
ArticleAbstract: Within the cheese industry is used the milk of a specific species of sheep whose wool is not suitablPalabras claves:Biodegradable polymers, Composite Materials, poly(lactic acidAutores:Ferri Azor J.M., López-Martínez J., Miguel Fernando Aldas Carrasco, Rouault N.J., Samper Madrigal M.D.Fuentes:googlescopusEffect of Maleinized Linseed Oil (MLO) on thermal and rheolological properties of PLA/MWCNT and PLA/HNT nanocomposites for additive manufacturing
ArticleAbstract: Purpose: This paper aims to describe the influence of maleinized linseed oil (MLO), when used as a lPalabras claves:3D Printing, additive manufacturing, carbon nanotubes, Halloysite nanotubes, Maleinized linseed oil, Polylactic acid, Rheological, thermalAutores:Christian Mauricio Cobos, Fenollar O., Ferrandiz-Bou S., Garzón L., López-Martínez J., Luis Eduardo Garzón MuñozFuentes:googlescopusFilms based on mater-bi® compatibilized with pine resin derivatives: Optical, barrier, and disintegration properties
ArticleAbstract: Mater-Bi® NF866 (MB) was blended with gum rosin and two pentaerythritol esters of gum rosin (labeledPalabras claves:Biodegradable, colophony, Compostable, Gum rosin, Pentaerythritol esters of gum rosin, Pine resin, Thermoplastic starchAutores:Cristina Pavon, José Miguel Ferri, López-Martínez J., Miguel Fernando Aldas Carrasco, Patricia Arrieta M.Fuentes:scopusImproved toughness in lignin/natural fiber composites plasticized with epoxidized and maleinized linseed oils
ArticleAbstract: The use of maleinized (MLO) and epoxidized (ELO) linseed oils as potential biobased plasticizers forPalabras claves:Arboform, Epoxidized oil, Maleinized linseed oil, Thermal stability, TOUGHNESSAutores:Carbonell-Verdu A., Dominici F., López-Martínez J., Luzi F., María Dolores Samper, Puglia D., Torre L.Fuentes:scopusMechanical, Dynamic-Mechanical, Thermal and Decomposition Behavior of 3D-Printed PLA Reinforced with CaCO<inf>3</inf> Fillers from Natural Resources
ArticleAbstract: This study evaluates the effect of CaCO3 fillers extracted from waste eggshells on 3Dprinted PLA perPalabras claves:3D-printing, biological filler, decomposition, dynamic-mechanical, mechanical, PLA polymer, surface appearance, thermal, WettabilityAutores:Cristina Pavon, Ferrandiz-Bou S., López-Martínez J., María Dolores Samper, Miguel Fernando Aldas Carrasco, Motoc D.L.Fuentes:scopusSilane-functionalized sheep wool fibers from dairy industry waste for the development of plasticized pla composites with maleinized linseed oil for injection-molded parts
ArticleAbstract: Poly(lactic acid) (PLA) was plasticized with maleinized linseed oil (MLO) and further reinforced witPalabras claves:injection molding, Maleinized linseed oil, Pla, Sheep wool fiber, silane coupling agentsAutores:López-Martínez J., Miguel Fernando Aldas Carrasco, Parres F., Patricia Arrieta M., Pawlak F.Fuentes:googlescopus