Mostrando 10 resultados de: 13
Filtros aplicados
Subtipo de publicación
Article(13)
Publisher
Polymers(5)
Journal of Applied Polymer Science(2)
Clean Technologies(1)
Green Materials(1)
Journal of Polymers and the Environment(1)
Área temáticas
Tecnología de otros productos orgánicos(8)
Ingeniería y operaciones afines(5)
Metalurgia y productos metálicos primarios(2)
Otros problemas y servicios sociales(2)
Textiles(2)
Área de conocimiento
Ciencia de materiales(11)
Polímero(6)
Material compuesto(5)
Ingeniería química(2)
Biotecnología(1)
A new bio-based fibre-reinforced polymer obtained from sheep wool short fibres and PLA
ArticleAbstract: Within the cheese industry is used the milk of a specific species of sheep whose wool is not suitablPalabras claves:Biodegradable polymers, Composite Materials, poly(lactic acidAutores:Ferri Azor J.M., López-Martínez J., Miguel Fernando Aldas Carrasco, Rouault N.J., Samper Madrigal M.D.Fuentes:googlescopusComparative characterization of gum rosins for their use as sustainable additives in polymeric matrices
ArticleAbstract: There is a growing interest in the use of non-polluting compounds, which come from renewable sourcesPalabras claves:Biomaterials, Differential scanning calorimetry, Gas chromatography, Gum rosin, Resins, thermogravimetric analysisAutores:Cristina Pavon, Hernández-Fernández J., López-Martínez J., Miguel Fernando Aldas CarrascoFuentes:scopusEffect of Maleinized Linseed Oil (MLO) on thermal and rheolological properties of PLA/MWCNT and PLA/HNT nanocomposites for additive manufacturing
ArticleAbstract: Purpose: This paper aims to describe the influence of maleinized linseed oil (MLO), when used as a lPalabras claves:3D Printing, additive manufacturing, carbon nanotubes, Halloysite nanotubes, Maleinized linseed oil, Polylactic acid, Rheological, thermalAutores:Christian Mauricio Cobos, Fenollar O., Ferrandiz-Bou S., Garzón L., López-Martínez J., Luis Eduardo Garzón MuñozFuentes:googlescopusGum rosin as a size control agent of poly(Butylene adipate-co-terephthalate) (pbat) domains to increase the toughness of packaging formulations based on polylactic acid (pla)
ArticleAbstract: Gum rosin (GR) was used as a natural additive to improve the compatibility between polylactic acid,Palabras claves:Barrier properties, Biodegradable polymers, Gum rosin, PBAT, Pla, Poly(butylene adipate-co-terephthalate, Polylactic acidAutores:José Miguel Ferri, López-Martínez J., Miguel Fernando Aldas Carrasco, Motoc D.L., Patricia Arrieta M., Peponi L.Fuentes:scopusImproved toughness in lignin/natural fiber composites plasticized with epoxidized and maleinized linseed oils
ArticleAbstract: The use of maleinized (MLO) and epoxidized (ELO) linseed oils as potential biobased plasticizers forPalabras claves:Arboform, Epoxidized oil, Maleinized linseed oil, Thermal stability, TOUGHNESSAutores:Carbonell-Verdu A., Dominici F., López-Martínez J., Luzi F., María Dolores Samper, Puglia D., Torre L.Fuentes:scopusImprovement of pbat processability and mechanical performance by blending with pine resin derivatives for injection moulding rigid packaging with enhanced hydrophobicity
ArticleAbstract: Polybutylene adipate-co-terephthalate (PBAT) is a biodegradable polymer with good features for packaPalabras claves:blends, Compatibility effect, Gum rosin, hydrophobicity, Packaging, Pine resin, Plasticizing effect, Polybutylene adipate-co-terephthalate (PBAT)Autores:Cristina Pavon, De-La-Rosa-Ramírez H., López-Martínez J., Miguel Fernando Aldas Carrasco, Patricia Arrieta M.Fuentes:scopusInfluence of the Presence of Poly(butylene succinate) in the Poly(ethylene terephthalate) Recycling Process
ArticleAbstract: Poly(butylene succinate) (PBS) is one of the contaminants in the Poly(ethylene terephthalate) (PET)Palabras claves:Contaminant, Degradation, Poly(butylene succinate), Poly(ethylene terephthalate), recyclingAutores:Bertomeu D., Cristina Pavon, De-La-Rosa-Ramírez H., López-Martínez J., María Dolores Samper, Miguel Fernando Aldas CarrascoFuentes:scopusThe Impact of Biodegradable Plastics in the Properties of Recycled Polyethylene Terephthalate
ArticleAbstract: Since biodegradable materials are unwittingly mixed with synthetic materials, this work aimed to stuPalabras claves:Biodegradable materials, contaminants, Miscibility, Polyethylene terephthalate (PET), recyclingAutores:Bertomeu D., Cristina Pavon, De-La-Rosa-Ramírez H., José Miguel Ferri, López-Martínez J., María Dolores Samper, Miguel Fernando Aldas CarrascoFuentes:scopusNew materials for 3D-printing based on polycaprolactone with gum rosin and beeswax as additives
ArticleAbstract: In this work, different materials for three-dimensional (3D)-printing were studied, which based on pPalabras claves:3D-printing, beeswax, Gum rosin, Natural additives, PolycaprolactoneAutores:Cristina Pavon, Ferrandiz-Bou S., López-Martínez J., Miguel Fernando Aldas CarrascoFuentes:scopusSilane-functionalized sheep wool fibers from dairy industry waste for the development of plasticized pla composites with maleinized linseed oil for injection-molded parts
ArticleAbstract: Poly(lactic acid) (PLA) was plasticized with maleinized linseed oil (MLO) and further reinforced witPalabras claves:injection molding, Maleinized linseed oil, Pla, Sheep wool fiber, silane coupling agentsAutores:López-Martínez J., Miguel Fernando Aldas Carrasco, Parres F., Patricia Arrieta M., Pawlak F.Fuentes:googlescopus