Mostrando 10 resultados de: 16
Publisher
Polymers(3)
Journal of Applied Polymer Science(2)
Polymer International(2)
Rapid Prototyping Journal(2)
Carbohydrate Polymers(1)
Área temáticas
Tecnología de otros productos orgánicos(12)
Ingeniería y operaciones afines(7)
Fabricación(3)
Ingeniería química(3)
Física aplicada(2)
Área de conocimiento
Ciencia de materiales(14)
Polímero(9)
Material compuesto(7)
Biotecnología(1)
Ciencias Agrícolas(1)
Effect of Maleinized Linseed Oil (MLO) on thermal and rheolological properties of PLA/MWCNT and PLA/HNT nanocomposites for additive manufacturing
ArticleAbstract: Purpose: This paper aims to describe the influence of maleinized linseed oil (MLO), when used as a lPalabras claves:3D Printing, additive manufacturing, carbon nanotubes, Halloysite nanotubes, Maleinized linseed oil, Polylactic acid, Rheological, thermalAutores:Christian Mauricio Cobos, Fenollar O., Ferrandiz-Bou S., Garzón L., López-Martínez J., Luis Eduardo Garzón MuñozFuentes:googlescopusEffect of miscibility on mechanical and thermal properties of poly(lactic acid)/ polycaprolactone blends
ArticleAbstract: Binary blends based on poly(lactic acid) (PLA) and polycaprolactone (PCL) were prepared by melt mixiPalabras claves:Binary blends, Degradability, FESEM, Mechanical properties, poly(lactic acid) (PLA), Polycaprolactone (PCL)Autores:Balart R., Fenollar O., García-Sanoguera D., Jorda-Vilaplana A., José Miguel FerriFuentes:scopusInfluence of the addition of 0.5 and 1% in weight of multi-wall carbon nanotubes (MWCNTs) in poly-lactic acid (PLA) for 3D printing
Conference ObjectAbstract: This research paper presents the characterization of a nanocomposite of polylactic acid (PLA) and caPalabras claves:3D Printing, FFF, PLA/MWCNTAutores:Christian Mauricio Cobos, Conejero A., Fenollar O., Ferrandiz-Bou S.Fuentes:googlescopusEsters of Cinnamic Acid as Green Plasticizers for Polylactide Formulations with Improved Ductility
ArticleAbstract: This study demonstrates the potential of different cinnamate esters, namely methyl trans-cinnamate (Palabras claves:Ductility, plasticizers, Polylactide, Reactive extrusion, terpenoidsAutores:Barandiaran A., Diego Lascano, Fenollar O., Gomez-Caturla J., Ivorra-Martínez J., Moreno V., Selles M.A.Fuentes:scopusEvaluation of different compatibilization strategies to improve the performance of injection-molded green composite pieces made of polylactide reinforced with short flaxseed fibers
ArticleAbstract: Green composites made of polylactide (PLA) and short flaxseed fibers (FFs) at 20 wt % were successfuPalabras claves:Fiber pretreatment, flax, Green composites, Pla, Reactive extrusionAutores:Agüero Á., Diego Lascano, Fenollar O., García-Sanoguera D., Ivorra-Martínez J., Sandra Rojas-Lema, Torres-Giner S.Fuentes:scopusStudy of the influence of the reprocessing cycles on the final properties of polylactide pieces obtained by injection molding
ArticleAbstract: This research work aims to study the influence of the reprocessing cycles on the mechanical, thermalPalabras claves:Circular economy, Extrusion cycles, injection molding, Mechanical recycling, PlaAutores:Agüero Á., Balart R., Boronat T., Diego Lascano, Fenollar O., Morcillo M.D.C., Quiles‐carrillo L., Torres-Giner S.Fuentes:scopusStudy of thermal and rheological properties of PLA loaded with carbon and halloysite nanotubes for additive manufacturing
ArticleAbstract: Purpose: This paper aims to propose using polylactic acid (PLA) as an alternative to nanocompositesPalabras claves:3D Printing, additive manufacturing, carbon nanotubes, Halloysites nanotubes, Rheological, Thermal testingAutores:Christian Mauricio Cobos, Fenollar O., Ferrandiz-Bou S., Garzón L., Lopez-Martinez J., Luis Eduardo Garzón MuñozFuentes:googlescopusThe effect of maleinized linseed oil (MLO) on mechanical performance of poly(lactic acid)-thermoplastic starch (PLA-TPS) blends
ArticleAbstract: In this work, poly(lactic acid), PLA and thermoplastic starch, TPS blends (with a fixed content of 3Palabras claves:Maleinized linseed oil, Plasticizing, poly(lactic acid), Thermoplastic starchAutores:Balart R., Fenollar O., García-García D., José Miguel Ferri, Sánchez-Nácher L.Fuentes:scopusThe effect of maleinized linseed oil as biobased plasticizer in poly(lactic acid)-based formulations
ArticleAbstract: The use of maleinized linseed oil (MLO) as a potential biobased plasticizer for poly(lactic acid) (PPalabras claves:anti-plasticization effects, environmentally friendly, maleinized linseed oil (MLO), Pla, plasticizers, poly(lactic acid)Autores:Balart R., Fenollar O., García-García D., José Miguel Ferri, Montanes N.Fuentes:scopusThe potential of flavonoids as natural antioxidants and UV light stabilizers for polypropylene
ArticleAbstract: This article presents a study on the stabilization of polypropylene against thermo-oxidation and UVPalabras claves:ageing, crystallization, Degradation, glass transition, properties and characterizationAutores:Balart R., Boronat T., Fages E., Fenollar O., María Dolores SamperFuentes:scopus