Mostrando 10 resultados de: 14
Filtros aplicados
Publisher
Journal of Applied Polymer Science(2)
Polymer International(2)
Polymers(2)
Rapid Prototyping Journal(2)
Carbohydrate Polymers(1)
Área temáticas
Tecnología de otros productos orgánicos(12)
Ingeniería y operaciones afines(5)
Fabricación(3)
Ingeniería química(3)
Física aplicada(2)
Effect of Maleinized Linseed Oil (MLO) on thermal and rheolological properties of PLA/MWCNT and PLA/HNT nanocomposites for additive manufacturing
ArticleAbstract: Purpose: This paper aims to describe the influence of maleinized linseed oil (MLO), when used as a lPalabras claves:3D Printing, additive manufacturing, carbon nanotubes, Halloysite nanotubes, Maleinized linseed oil, Polylactic acid, Rheological, thermalAutores:Christian Mauricio Cobos, Fenollar O., Ferrandiz-Bou S., Garzón L., López-Martínez J., Luis Eduardo Garzón MuñozFuentes:googlescopusEffect of miscibility on mechanical and thermal properties of poly(lactic acid)/ polycaprolactone blends
ArticleAbstract: Binary blends based on poly(lactic acid) (PLA) and polycaprolactone (PCL) were prepared by melt mixiPalabras claves:Binary blends, Degradability, FESEM, Mechanical properties, poly(lactic acid) (PLA), Polycaprolactone (PCL)Autores:Balart R., Fenollar O., García-Sanoguera D., Jorda-Vilaplana A., José Miguel FerriFuentes:scopusInfluence of the addition of 0.5 and 1% in weight of multi-wall carbon nanotubes (MWCNTs) in poly-lactic acid (PLA) for 3D printing
Conference ObjectAbstract: This research paper presents the characterization of a nanocomposite of polylactic acid (PLA) and caPalabras claves:3D Printing, FFF, PLA/MWCNTAutores:Christian Mauricio Cobos, Conejero A., Fenollar O., Ferrandiz-Bou S.Fuentes:googlescopusEsters of Cinnamic Acid as Green Plasticizers for Polylactide Formulations with Improved Ductility
ArticleAbstract: This study demonstrates the potential of different cinnamate esters, namely methyl trans-cinnamate (Palabras claves:Ductility, plasticizers, Polylactide, Reactive extrusion, terpenoidsAutores:Barandiaran A., Diego Lascano, Fenollar O., Gomez-Caturla J., Ivorra-Martínez J., Moreno V., Selles M.A.Fuentes:scopusEvaluation of different compatibilization strategies to improve the performance of injection-molded green composite pieces made of polylactide reinforced with short flaxseed fibers
ArticleAbstract: Green composites made of polylactide (PLA) and short flaxseed fibers (FFs) at 20 wt % were successfuPalabras claves:Fiber pretreatment, flax, Green composites, Pla, Reactive extrusionAutores:Agüero Á., Diego Lascano, Fenollar O., García-Sanoguera D., Ivorra-Martínez J., Sandra Rojas-Lema, Torres-Giner S.Fuentes:scopusStudy of the influence of the reprocessing cycles on the final properties of polylactide pieces obtained by injection molding
ArticleAbstract: This research work aims to study the influence of the reprocessing cycles on the mechanical, thermalPalabras claves:Circular economy, Extrusion cycles, injection molding, Mechanical recycling, PlaAutores:Agüero Á., Balart R., Boronat T., Diego Lascano, Fenollar O., Morcillo M.D.C., Quiles‐carrillo L., Torres-Giner S.Fuentes:scopusStudy of thermal and rheological properties of PLA loaded with carbon and halloysite nanotubes for additive manufacturing
ArticleAbstract: Purpose: This paper aims to propose using polylactic acid (PLA) as an alternative to nanocompositesPalabras claves:3D Printing, additive manufacturing, carbon nanotubes, Halloysites nanotubes, Rheological, Thermal testingAutores:Christian Mauricio Cobos, Fenollar O., Ferrandiz-Bou S., Garzón L., Lopez-Martinez J., Luis Eduardo Garzón MuñozFuentes:googlescopusThe effect of maleinized linseed oil (MLO) on mechanical performance of poly(lactic acid)-thermoplastic starch (PLA-TPS) blends
ArticleAbstract: In this work, poly(lactic acid), PLA and thermoplastic starch, TPS blends (with a fixed content of 3Palabras claves:Maleinized linseed oil, Plasticizing, poly(lactic acid), Thermoplastic starchAutores:Balart R., Fenollar O., García-García D., José Miguel Ferri, Sánchez-Nácher L.Fuentes:scopusThe effect of maleinized linseed oil as biobased plasticizer in poly(lactic acid)-based formulations
ArticleAbstract: The use of maleinized linseed oil (MLO) as a potential biobased plasticizer for poly(lactic acid) (PPalabras claves:anti-plasticization effects, environmentally friendly, maleinized linseed oil (MLO), Pla, plasticizers, poly(lactic acid)Autores:Balart R., Fenollar O., García-García D., José Miguel Ferri, Montanes N.Fuentes:scopusThe potential of flavonoids as natural antioxidants and UV light stabilizers for polypropylene
ArticleAbstract: This article presents a study on the stabilization of polypropylene against thermo-oxidation and UVPalabras claves:ageing, crystallization, Degradation, glass transition, properties and characterizationAutores:Balart R., Boronat T., Fages E., Fenollar O., María Dolores SamperFuentes:scopus