Mostrando 6 resultados de: 6
Área temáticas
Ingeniería y operaciones afines(4)
Tecnología de otros productos orgánicos(4)
Fabricación(2)
Industria papelera(1)
Ingeniería química(1)
Objetivos de Desarrollo Sostenible
ODS 12: Producción y consumo responsables(6)
ODS 9: Industria, innovación e infraestructura(6)
Effect of miscibility on mechanical and thermal properties of poly(lactic acid)/ polycaprolactone blends
ArticleAbstract: Binary blends based on poly(lactic acid) (PLA) and polycaprolactone (PCL) were prepared by melt mixiPalabras claves:Binary blends, Degradability, FESEM, Mechanical properties, poly(lactic acid) (PLA), Polycaprolactone (PCL)Autores:Balart R., Fenollar O., García-Sanoguera D., Jorda-Vilaplana A., José Miguel FerriFuentes:scopusInfluence of the addition of 0.5 and 1% in weight of multi-wall carbon nanotubes (MWCNTs) in poly-lactic acid (PLA) for 3D printing
Conference ObjectAbstract: This research paper presents the characterization of a nanocomposite of polylactic acid (PLA) and caPalabras claves:3D Printing, FFF, PLA/MWCNTAutores:Christian Mauricio Cobos, Conejero A., Fenollar O., Ferrandiz-Bou S.Fuentes:googlescopusEvaluation of different compatibilization strategies to improve the performance of injection-molded green composite pieces made of polylactide reinforced with short flaxseed fibers
ArticleAbstract: Green composites made of polylactide (PLA) and short flaxseed fibers (FFs) at 20 wt % were successfuPalabras claves:Fiber pretreatment, flax, Green composites, Pla, Reactive extrusionAutores:Agüero Á., Diego Lascano, Fenollar O., García-Sanoguera D., Ivorra-Martínez J., Sandra Rojas-Lema, Torres-Giner S.Fuentes:scopusStudy of the influence of the reprocessing cycles on the final properties of polylactide pieces obtained by injection molding
ArticleAbstract: This research work aims to study the influence of the reprocessing cycles on the mechanical, thermalPalabras claves:Circular economy, Extrusion cycles, injection molding, Mechanical recycling, PlaAutores:Agüero Á., Balart R., Boronat T., Diego Lascano, Fenollar O., Morcillo M.D.C., Quiles‐carrillo L., Torres-Giner S.Fuentes:scopusThe effect of maleinized linseed oil (MLO) on mechanical performance of poly(lactic acid)-thermoplastic starch (PLA-TPS) blends
ArticleAbstract: In this work, poly(lactic acid), PLA and thermoplastic starch, TPS blends (with a fixed content of 3Palabras claves:Maleinized linseed oil, Plasticizing, poly(lactic acid), Thermoplastic starchAutores:Balart R., Fenollar O., García-García D., José Miguel Ferri, Sánchez-Nácher L.Fuentes:scopusUpgrading recycled polypropylene from textile wastes in wood plastic composites with short hemp fiber
ArticleAbstract: This research reports the manufacturing and characterization of green composites made from recycledPalabras claves:compatibilization, injection molding, polymer composites, Recycled polypropylene, Short hemp fiberAutores:Burgada F., Diego Lascano, Fages E., Fenollar O., Ivorra-Martínez J., Patricia Arrieta M., Quiles‐carrillo L.Fuentes:scopus