Mostrando 10 resultados de: 12
Filtros aplicados
Subtipo de publicación
Article(12)
Área temáticas
Tecnología de otros productos orgánicos(9)
Fabricación(2)
Ingeniería química(2)
Textiles(2)
Física aplicada(1)
Área de conocimiento
Ciencia de materiales(10)
Material compuesto(8)
Ingeniería ambiental(3)
Cinética química(2)
Ingeniería química(2)
Origen
scopus(12)
Development of injection-molded polylactide pieces with high toughness by the addition of lactic acid oligomer and characterization of their shape memory behavior
ArticleAbstract: This work reports the effect of the addition of an oligomer of lactic acid (OLA), in the 5-20 wt% raPalabras claves:Impact modifier, OLA, Packaging applications, Pla, Shape memoryAutores:Balart R., Boronat T., Diego Lascano, Ivorra-Martínez J., Moraga G., Quiles‐carrillo L., Sandra Rojas-Lema, Torres-Giner S.Fuentes:scopusOptimization of the curing and post-curing conditions for the manufacturing of partially bio-based epoxy resins with improved toughness
ArticleAbstract: This research deals with the influence of different curing and post-curing temperatures on the mechaPalabras claves:Bio-based thermosets, Gel time, Mechanical properties, Post-curingAutores:Boronat T., Diego Lascano, Montanes N., Quiles‐carrillo L., Torres-Giner S.Fuentes:scopusOptimization of the loading of an environmentally friendly compatibilizer derived from linseed oil in poly(lactic acid)/diatomaceous earth composites
ArticleAbstract: Maleinized linseed oil (MLO) has been successfully used as biobased compatibilizer in polyester blenPalabras claves:Active containers, Biocomposites, Diatomaceous earth, Maleinized linseed oil MLO, poly(lactic acid)Autores:Agüero Á., Diego Lascano, Gonzalez L., Montanes N., Quiles‐carrillo L.Fuentes:scopusManufacturing and characterization of highly environmentally friendly sandwich composites from polylactide cores and flax-polylactide faces
ArticleAbstract: This work focuses on the manufacturing and characterization of highly environmentally friendly lightPalabras claves:Eco-friendly sandwich structures, Hot compression molding, PLA honeycomb core, Three-point bending testAutores:Balart R., Boronat T., Diego Lascano, Guillen-Pineda R., Ivorra-Martínez J., Montanes N., Quiles‐carrillo L.Fuentes:scopusManufacturing of composite materials with high environmental efficiency using epoxy resin of renewable origin and permeable light cores for vacuum-assisted infusion molding
ArticleAbstract: This work focuses on the manufacturing and characterization of novel and lightweight hybrid sandwichPalabras claves:flax fibers, Hybrid composite materials, non-woven cores, silane coupling agents, VARIM process, basalt fibersAutores:Balart R., Boronat T., Diego Lascano, Quiles‐carrillo L., Valcárcel J.Fuentes:scopusKinetic analysis of the curing of a partially biobased epoxy resin using dynamic differential scanning calorimetry
ArticleAbstract: This research presents a cure kinetics study of an epoxy system consisting of a partially bio-sourcePalabras claves:Bio-sourced epoxy resin, Cure kinetics, Differential scanning calorimetry (DSC), Epoxy resinAutores:Balart R., Boronat T., Diego Lascano, Montanes N., Quiles‐carrillo L.Fuentes:scopusKinetic analysis of the curing process of biobased epoxy resin from epoxidized linseed oil by dynamic differential scanning calorimetry
ArticleAbstract: The curing process of epoxy resin based on epoxidized linseed oil (ELO) is studied using dynamic difPalabras claves:Biobased epoxy resin, Epoxidized linseed oil, flax, kinetic analysisAutores:Balart R., Diego Lascano, Fombuena V., Lerma‐canto A., Montanes N., Quiles‐carrillo L.Fuentes:scopusUpgrading argan shell wastes in wood plastic composites with biobased polyethylene matrix and different compatibilizers
ArticleAbstract: The present study reports on the development of wood plastic composites (WPC) based on micronized arPalabras claves:Argan shell particles, Com-patibilization, Mechanical properties, Polyethylene, Wood plastic compositeAutores:Gomez-Caturla J., Ivorra-Martínez J., Jorda-Reolid M., Quiles‐carrillo L., Sandra Rojas-Lema, Stefani P.M.Fuentes:scopusUpgrading recycled polypropylene from textile wastes in wood plastic composites with short hemp fiber
ArticleAbstract: This research reports the manufacturing and characterization of green composites made from recycledPalabras claves:compatibilization, injection molding, polymer composites, Recycled polypropylene, Short hemp fiberAutores:Burgada F., Diego Lascano, Fages E., Fenollar O., Ivorra-Martínez J., Patricia Arrieta M., Quiles‐carrillo L.Fuentes:scopusStudy of the influence of the reprocessing cycles on the final properties of polylactide pieces obtained by injection molding
ArticleAbstract: This research work aims to study the influence of the reprocessing cycles on the mechanical, thermalPalabras claves:Circular economy, Extrusion cycles, injection molding, Mechanical recycling, PlaAutores:Agüero Á., Balart R., Boronat T., Diego Lascano, Fenollar O., Morcillo M.D.C., Quiles‐carrillo L., Torres-Giner S.Fuentes:scopus