Mostrando 10 resultados de: 10
Filtros aplicados
Subtipo de publicación
Article(10)
Publisher
Polymers(4)
Materials(2)
Express Polymer Letters(1)
Green Materials(1)
Journal of Thermoplastic Composite Materials(1)
Área temáticas
Tecnología de otros productos orgánicos(7)
Fabricación(5)
Ingeniería química(4)
Tecnologías de limpieza, color y recubrimiento(1)
Área de conocimiento
Ciencia de materiales(9)
Material compuesto(6)
Ingeniería ambiental(3)
Cinética química(2)
Ingeniería química(2)
Origen
scopus(10)
A comparative study of mechanical properties of polylactide bio-composites with woven and non-woven jute reinforcements
ArticleAbstract: The concern that has arisen in recent years over the excessive use of oil-based materials has made tPalabras claves:Autores:Aljaro C., Diego Lascano, Fages E., Ivorra-Martínez J., Montanes N., Sandra Rojas-LemaFuentes:scopusOptimization of the curing and post-curing conditions for the manufacturing of partially bio-based epoxy resins with improved toughness
ArticleAbstract: This research deals with the influence of different curing and post-curing temperatures on the mechaPalabras claves:Bio-based thermosets, Gel time, Mechanical properties, Post-curingAutores:Boronat T., Diego Lascano, Montanes N., Quiles‐carrillo L., Torres-Giner S.Fuentes:scopusOptimization of the loading of an environmentally friendly compatibilizer derived from linseed oil in poly(lactic acid)/diatomaceous earth composites
ArticleAbstract: Maleinized linseed oil (MLO) has been successfully used as biobased compatibilizer in polyester blenPalabras claves:Active containers, Biocomposites, Diatomaceous earth, Maleinized linseed oil MLO, poly(lactic acid)Autores:Agüero Á., Diego Lascano, Gonzalez L., Montanes N., Quiles‐carrillo L.Fuentes:scopusManufacturing and characterization of highly environmentally friendly sandwich composites from polylactide cores and flax-polylactide faces
ArticleAbstract: This work focuses on the manufacturing and characterization of highly environmentally friendly lightPalabras claves:Eco-friendly sandwich structures, Hot compression molding, PLA honeycomb core, Three-point bending testAutores:Balart R., Boronat T., Diego Lascano, Guillen-Pineda R., Ivorra-Martínez J., Montanes N., Quiles‐carrillo L.Fuentes:scopusManufacturing and characterization of highly environmentally-friendly composites with polylactide matrix and mango kernel seed flour
ArticleAbstract: This work reports on the development of polylactide (PLA)/mango kernel seed flour (MKSF) compositesPalabras claves:Biodegradable polymers, Mechanical properties, plasticizer, polymer composites, thermal propertiesAutores:Balart R., Diego Lascano, Dominici F., Gomez-Caturla J., Montanes N., Puglia D., Torre L.Fuentes:scopusManufacturing and characterization of poly(lactic acid) composites with hydroxyapatite
ArticleAbstract: Hydroxyapatite (HA), a naturally occurring calcium orthophosphate, possesses the most similar chemicPalabras claves:Bone tissue engineering, Hydroxyapatite, poly(lactic acid), screws, thermal and mechanical propertiesAutores:Balart R., Fenollar O., Jordá J., José Miguel Ferri, Montanes N.Fuentes:scopusKinetic analysis of the curing of a partially biobased epoxy resin using dynamic differential scanning calorimetry
ArticleAbstract: This research presents a cure kinetics study of an epoxy system consisting of a partially bio-sourcePalabras claves:Bio-sourced epoxy resin, Cure kinetics, Differential scanning calorimetry (DSC), Epoxy resinAutores:Balart R., Boronat T., Diego Lascano, Montanes N., Quiles‐carrillo L.Fuentes:scopusKinetic analysis of the curing process of biobased epoxy resin from epoxidized linseed oil by dynamic differential scanning calorimetry
ArticleAbstract: The curing process of epoxy resin based on epoxidized linseed oil (ELO) is studied using dynamic difPalabras claves:Biobased epoxy resin, Epoxidized linseed oil, flax, kinetic analysisAutores:Balart R., Diego Lascano, Fombuena V., Lerma‐canto A., Montanes N., Quiles‐carrillo L.Fuentes:scopusPlasticization effects of epoxidized vegetable oils on mechanical properties of poly(3-hydroxybutyrate)
ArticleAbstract: The effect of various epoxidized vegetable oils as potential plasticizers for poly(3-hydroxybutyratePalabras claves:Biodegradable, Epoxidized linseed oil (ELO), epoxidized soybean oil (ESBO), plasticization, poly(3-hydroxybutyrate) (PHB)Autores:Balart R., García-García D., José Miguel Ferri, Lopez-Martinez J., Montanes N.Fuentes:scopusToughened poly (lactic acid)-PLA formulations by binary blends with poly(butylene succinate-co-adipate)-PBSA and their shape memory behaviour
ArticleAbstract: This study reports the effect of poly(butylene succinate-co-adipate) (PBSA) on the mechanical perforPalabras claves:Binary blends, Poly (lactic acid) (PLA), Poly(butylene succinate-co-adipate) (PBSA), Shape memory behaviourAutores:Balart R., Boronat T., Diego Lascano, Montanes N., Quiles‐carrillo L.Fuentes:scopus