Mostrando 6 resultados de: 6
Filtros aplicados
Subtipo de publicación
Article(6)
Área temáticas
Tecnología de otros productos orgánicos(5)
Ingeniería y operaciones afines(4)
Ingeniería química(1)
Metalurgia y productos metálicos primarios(1)
Área de conocimiento
Ciencia de materiales(6)
Material compuesto(3)
Polímero(2)
Cinética química(1)
Ingeniería ambiental(1)
Origen
scopus(6)
Functionalization of partially bio-based poly(ethylene terephthalate) by blending with fully bio-based poly(amide) 10,10 and a glycidyl methacrylate-based compatibilizer
ArticleAbstract: This work shows the potential of binary blends composed of partially bio-based poly(ethyelene terephPalabras claves:bio-based, compatibilization, Mechanical properties, MORPHOLOGY, Poly(amide) 1010-PA1010, Poly(ethyelene terephthalate)-PET, Xibond™ 920Autores:Balart R., Diego Lascano, Jorda M., Montanes N., Montava-Jorda S., Quiles‐carrillo L.Fuentes:scopusOptimization of the curing and post-curing conditions for the manufacturing of partially bio-based epoxy resins with improved toughness
ArticleAbstract: This research deals with the influence of different curing and post-curing temperatures on the mechaPalabras claves:Bio-based thermosets, Gel time, Mechanical properties, Post-curingAutores:Boronat T., Diego Lascano, Montanes N., Quiles‐carrillo L., Torres-Giner S.Fuentes:scopusOptimization of the loading of an environmentally friendly compatibilizer derived from linseed oil in poly(lactic acid)/diatomaceous earth composites
ArticleAbstract: Maleinized linseed oil (MLO) has been successfully used as biobased compatibilizer in polyester blenPalabras claves:Active containers, Biocomposites, Diatomaceous earth, Maleinized linseed oil MLO, poly(lactic acid)Autores:Agüero Á., Diego Lascano, Gonzalez L., Montanes N., Quiles‐carrillo L.Fuentes:scopusManufacturing and characterization of functionalized aliphatic polyester from poly(lactic acid) with halloysite nanotubes
ArticleAbstract: This work reports the potential of poly(lactic acid)-PLA composites with different halloysite nanotuPalabras claves:Halloysite nanotubes, Mechanical characterization, MORPHOLOGY, poly(lactic acid), thermal characterizationAutores:Chacon V., Diego Lascano, Montanes N., Montava-Jorda S., Sánchez-Nácher L.Fuentes:scopusKinetic analysis of the curing of a partially biobased epoxy resin using dynamic differential scanning calorimetry
ArticleAbstract: This research presents a cure kinetics study of an epoxy system consisting of a partially bio-sourcePalabras claves:Bio-sourced epoxy resin, Cure kinetics, Differential scanning calorimetry (DSC), Epoxy resinAutores:Balart R., Boronat T., Diego Lascano, Montanes N., Quiles‐carrillo L.Fuentes:scopusToughened poly (lactic acid)-PLA formulations by binary blends with poly(butylene succinate-co-adipate)-PBSA and their shape memory behaviour
ArticleAbstract: This study reports the effect of poly(butylene succinate-co-adipate) (PBSA) on the mechanical perforPalabras claves:Binary blends, Poly (lactic acid) (PLA), Poly(butylene succinate-co-adipate) (PBSA), Shape memory behaviourAutores:Balart R., Boronat T., Diego Lascano, Montanes N., Quiles‐carrillo L.Fuentes:scopus