Mostrando 10 resultados de: 12
Publisher
Applied Surface Science(2)
Materials Research(2)
Corrosion Science(1)
International Journal of Thermophysics(1)
Journal of Non-Crystalline Solids(1)
Área temáticas
Ingeniería y operaciones afines(12)
Fabricación(4)
Física aplicada(4)
Tecnología de otros productos orgánicos(3)
Ingeniería química(1)
Characterization of mechanical properties and electrochemical behaviour in a Hank's solution of 316L/Cr<inf>1-</inf><inf>x</inf>Al<inf>x</inf>N system
Conference ObjectAbstract: Cr1-xAlxN hard coatings were successfully deposited by R.F. reactive magnetron co-sputtering in an APalabras claves:Autores:Benitez-Castro A., Caicedo J.C., Giraldo-Betancur A.L., Martin Yañez-Limon, Mũoz-Saldãa J., Osorio D., Sanchéz O.M., William Arnulfo Ch Aperador, Zambrano G.Fuentes:scopusCorrosion study of Alumina/Yttria-Stabilized Zirconia (Al<inf>2</inf>O<inf>3</inf>/YSZ) nanostructured Thermal Barrier Coatings (TBC) exposed to high temperature treatment
ArticleAbstract: Thermal Barrier Coatings (TBC) of 8% Yttria-Stabilized Zirconia (8YSZ) were deposited on AISI-304 suPalabras claves:Electrochemical impedance spectroscopy, Thermal Barrier Coatings, thin films, yttria-stabilized zirconiaAutores:Amaya C., Caicedo J.C., Espinoza-Beltran F.J., Mũoz-Saldãa J., Prieto P., William Arnulfo Ch Aperador, Zambrano G.Fuentes:scopusFollowing the integration of diamond particles on the lapping-plate surface: Towards a more efficient charging process
ArticleAbstract: Even when the charging of lapping plates can extensively influence their subsequent finishing perforPalabras claves:atomic force microscopy, diamond charging process, image analysis, Lapping plate topography, Raman spectroscopyAutores:Coronado F., Espinoza-Beltrn F., Herrera-Gomez A., Martin Yañez-Limon, Mayén-Mondragón R., Mũoz-Saldãa J., Ramrez-Bon R., Vargas-Ortz R.Fuentes:scopusElectrodeposition of Chitosan on Ti-6Al-4V Surfaces: A Study of Process Parameters
ReviewAbstract: The effect of different electrodeposition variables of chitosan coatings on Ti-6Al-4V substrates isPalabras claves:bioactive coatings, Chitosan, electrochemical deposition, Hydrogel, metallic implantsAutores:Alfredo Valarezo, D. Álvarez, Daniela A. Viteri, Giraldo-Betancur A.L., José F. Álvarez-Barreto, Lorena Bejarano M., Marco Leon, Mũoz-Saldãa J.Fuentes:scopusErratum: Electrodeposition of Chitosan on Ti-6Al-4V Surfaces: A Study of Process Parameters (Materials Research 25 (e20210552) DOI: 10.1590/1980-5373-MR-2021-0552)
OtherAbstract: In the article “Electrodeposition of Chitosan on Ti-6Al-4V Surfaces: A Study of Process Parameters”,Palabras claves:Autores:Alfredo Valarezo, D. Álvarez, Daniela A. Viteri, Giraldo-Betancur A.L., José F. Álvarez-Barreto, Lorena Bejarano M., Marco Leon, Mũoz-Saldãa J.Fuentes:scopusEffect of HVOF processing parameters on the properties of NiCoCrAlY coatings by design of experiments
ReviewAbstract: The effect of three principal, independent, high-velocity oxygen fuel (HVOF)-processing parameters oPalabras claves:design of experiments, HVOF, NiCoCrAlY, process parameters, Properties, Residual stressAutores:Alfredo Valarezo, Alvarado-Orozco J.M., Espinoza-Beltran F.J., Lozano-Mandujano D., Mũoz-Saldãa J., Poblano-Salas C.A., Ruiz-Luna H., Trápaga-Martínez L.G.Fuentes:googlescopusEffect of applied bias voltage on corrosion-resistance for TiC <inf>1-x</inf> N <inf>x</inf> and Ti <inf>1-x</inf> Nb <inf>x</inf> C <inf>1-y</inf> N <inf>y</inf> coatings
ArticleAbstract: Corrosion-resistance behavior of titanium carbon nitride (Ti-C-N) and titanium niobium carbon nitridPalabras claves:electrochemical properties, Raman spectra, X-ray scatteringAutores:Alvarado-Rivera J., Amaya C., Caicedo J.C., Gómez M.E., Mũoz-Saldãa J., Prieto P., William Arnulfo Ch Aperador, Yate L., Zambrano G.Fuentes:scopusPZT ferroelectric ceramics obtained by sol-gel method using 2-metoxyethanol route for pyroelectric sensors
Conference ObjectAbstract: We report on the synthesis of Pb(Zr1-xTix)O 3 powders by the sol-gel process using the 2-metoxyethanPalabras claves:Ferroelectrics, Multifunctional ceramics, Photopyroelectric response, Pyroelectric ceramics, pzt, Sol-gel routeAutores:Avalos-Borja M., Bucio-Hernández Y., Flores-Noria J.R., García-Rodríguez F.J., Garnica-Romo M.G., Martin Yañez-Limon, Mũoz-Saldãa J., Rivera-Ruedas M.G.Fuentes:scopusMechanical and thermal properties of SiO<inf>2</inf>-PMMA monoliths
ArticleAbstract: Organic-inorganic hybrid monoliths of cross-linked polymethylmethacrylate (PMMA) and silica (SiO2) wPalabras claves:Atomic force and scanning tunneling microscopy, Crack growth, Fracture, FTIR measurements, hardness, Indentation, microindentation, Lasers, Mechanical properties, Optical microscopy, Organic-inorganic hybrids, Sol-gels (xerogels), thermal properties, Time resolved measurementsAutores:Almaral-Sánchez J., Avila-Herrera C., Gomez-Guzman O., Martin Yañez-Limon, Mũoz-Saldãa J., Ramírez-Bon R.Fuentes:scopusMechanical, tribological, and electrochemical behavior of Cr <inf>1-x</inf> Al <inf>x</inf> N coatings deposited by r.f. reactive magnetron co-sputtering method
ArticleAbstract: Chromium aluminum nitride (Cr 1-x Al x N) coatings were deposited onto AISI H13 steel and silicon suPalabras claves:Co-sputtering, CORROSIÓN, Friction, Hard coatings, NanoindentationAutores:Amaya C., Beltran F.E., Caicedo J.C., Ipaz L., Landaverde M.A.H., Mũoz-Saldãa J., Sanchéz J.E., Sanchéz O.M., William Arnulfo Ch Aperador, Zambrano G.Fuentes:scopus