Mostrando 10 resultados de: 12
Publisher
Applied Surface Science(2)
Materials Research(2)
Corrosion Science(1)
International Journal of Thermophysics(1)
Journal of Non Crystalline Solids(1)
Área temáticas
Ingeniería y operaciones afines(12)
Fabricación(4)
Física aplicada(4)
Tecnología de otros productos orgánicos(3)
Ingeniería química(1)
Área de conocimiento
Ciencia de materiales(12)
Cerámico(2)
Biomateriales(1)
Corrosión(1)
Ingeniería de manufactura(1)
Characterization of mechanical properties and electrochemical behaviour in a Hank's solution of 316L/Cr1- xAlxN system
Conference ObjectAbstract: Cr<inf>1-x</inf>Al<inf>x</inf>N hard coatings were successfully deposited by R.F. reactive magnetronPalabras claves:Autores:Benitez-Castro A., Caicedo J.C., Giraldo-Betancur A.L., Martin Yañez-Limon, Mũoz-Saldãa J., Osorio D., Sanchéz O.M., William Arnulfo Ch Aperador, Zambrano G.Fuentes:scopusThermal characterization of PZT ceramics obtained by mechanically activated mixed oxides using different Pb sources
ArticleAbstract: In this study, three sets of PZT samples with compositions 57/43 and 55/45 (rhombohedral phase), 53/Palabras claves:Curie temperature, Ferroelectrics, Photoacoustic spectroscopy, Pyroelectrics, Specific heat, Thermal diffusivityAutores:Bolarín-Miró A., Martin Yañez-Limon, Mũoz-Saldãa J., Ramírez-López L.M., Rivera-Ruedas G., Sánchez De Jesús F.Fuentes:scopusStatistical characterization of the lapping plate surface morphology evolution in a diamond charging process
ArticleAbstract: The topographical evolution of a lapping plate surface during a diamond charging process was followePalabras claves:atomic force microscopy, diamond charging process, Height correlation function, Lapping plate topographyAutores:Espinoza-Beltran F.J., Martin Yañez-Limon, Mayén-Mondragón R., Montero-Camacho O., Mũoz-Saldãa J., Ramírez-Bon R., Rocha-Gallardo H.Fuentes:scopusCorrosion study of Alumina/Yttria-Stabilized Zirconia (Al2O3/YSZ) nanostructured Thermal Barrier Coatings (TBC) exposed to high temperature treatment
ArticleAbstract: Thermal Barrier Coatings (TBC) of 8% Yttria-Stabilized Zirconia (8YSZ) were deposited on AISI-304 suPalabras claves:Electrochemical impedance spectroscopy, Thermal Barrier Coatings, thin films, yttria-stabilized zirconiaAutores:Amaya C., Caicedo J.C., Espinoza-Beltran F.J., Mũoz-Saldãa J., Prieto P., William Arnulfo Ch Aperador, Zambrano G.Fuentes:scopusEffect of HVOF processing parameters on the properties of NiCoCrAlY coatings by design of experiments
ReviewAbstract: The effect of three principal, independent, high-velocity oxygen fuel (HVOF)-processing parameters oPalabras claves:design of experiments, HVOF, NiCoCrAlY, process parameters, Properties, Residual stressAutores:Alfredo Valarezo, Alvarado-Orozco J.M., Espinoza-Beltran F.J., Lozano-Mandujano D., Mũoz-Saldãa J., Poblano-Salas C.A., Ruiz-Luna H., Trápaga-Martínez L.G.Fuentes:googlescopusEffect of applied bias voltage on corrosion-resistance for TiC 1-x N x and Ti 1-x Nb x C 1-y N y coatings
ArticleAbstract: Corrosion-resistance behavior of titanium carbon nitride (Ti-C-N) and titanium niobium carbon nitridPalabras claves:electrochemical properties, Raman spectra, X-ray scatteringAutores:Alvarado-Rivera J., Amaya C., Caicedo J.C., Gómez M.E., Mũoz-Saldãa J., Prieto P., William Arnulfo Ch Aperador, Yate L., Zambrano G.Fuentes:scopusElectrodeposition of Chitosan on Ti-6Al-4V Surfaces: A Study of Process Parameters
ReviewAbstract: The effect of different electrodeposition variables of chitosan coatings on Ti-6Al-4V substrates isPalabras claves:bioactive coatings, Chitosan, electrochemical deposition, Hydrogel, metallic implantsAutores:Alfredo Valarezo, D. Álvarez, Daniela A. Viteri, Doménica Alvarez, Giraldo-Betancur A.L., José F. Álvarez-Barreto, Lorena Bejarano M., Marco Leon, Mũoz-Saldãa J.Fuentes:scopusErratum: Electrodeposition of Chitosan on Ti-6Al-4V Surfaces: A Study of Process Parameters (Materials Research 25 (e20210552) DOI: 10.1590/1980-5373-MR-2021-0552)
OtherAbstract: In the article “Electrodeposition of Chitosan on Ti-6Al-4V Surfaces: A Study of Process Parameters”,Palabras claves:Autores:Alfredo Valarezo, D. Álvarez, Daniela A. Viteri, Doménica Alvarez, Giraldo-Betancur A.L., José F. Álvarez-Barreto, Lorena Bejarano M., Marco Leon, Mũoz-Saldãa J.Fuentes:scopusMechanical and thermal properties of SiO2-PMMA monoliths
ArticleAbstract: Organic-inorganic hybrid monoliths of cross-linked polymethylmethacrylate (PMMA) and silica (SiO<infPalabras claves:Atomic force and scanning tunneling microscopy, Crack growth, Fracture, FTIR measurements, hardness, Indentation, microindentation, Lasers, mechanical properties, Optical microscopy, Organic-inorganic hybrids, Sol-gels (xerogels), thermal properties, Time resolved measurementsAutores:Almaral-Sánchez J., Avila-Herrera C., Gomez-Guzman O., Martin Yañez-Limon, Mũoz-Saldãa J., Ramírez-Bon R.Fuentes:scopusMechanical, tribological, and electrochemical behavior of Cr 1-x Al x N coatings deposited by r.f. reactive magnetron co-sputtering method
ArticleAbstract: Chromium aluminum nitride (Cr <inf>1-x</inf> Al <inf>x</inf> N) coatings were deposited onto AISI H1Palabras claves:Co-sputtering, CORROSIÓN, Friction, Hard coatings, NanoindentationAutores:Amaya C., Beltran F.E., Caicedo J.C., Ipaz L., Landaverde M.A.H., Mũoz-Saldãa J., Sanchéz J.E., Sanchéz O.M., William Arnulfo Ch Aperador, Zambrano G.Fuentes:scopus