Regresar

Al<inf>2</inf>Mo<inf>3</inf>O<inf>12</inf>/polyethylene composites with reduced coefficient of thermal expansion

Abstract:

Recently, polymer composites reinforced with low fractions of thermomiotic nanoceramics have triggered a lot of research. The efforts have been focused on achieving considerable reduction of the coefficient of thermal expansion (CTE) of polymeric materials without deterioration of other physical properties. In this context, polyethylene (PE) composites reinforced with different loads of Al2Mo3O12 nanofillers (0.5-4 mass %) were fabricated by micro-compounding. To enhance the interfacial interaction between the two components, chemical functionalization of Al2Mo 3O12 was performed with vinyltrimethoxysilane (VTMS) prior to micro-compounding. Infrared spectroscopy and thermogravimetry demonstrated the successful grafting of VTMS on the Al2Mo3O 12 surface. The composites showed strongly decreased CTEs, up to 46 % reduction for loadings of 4 mass % compared with neat PE, suggesting intimate filler-matrix interactions. The variation of CTEs of the composites in terms of the filler fraction was successfully described by Turner's model allowing calculation of the bulk modulus of monoclinic Al2Mo3O 12 (13.6 ± 2.6 GPa), in agreement with the value obtained by an ultrasonic method. The thermal stability of the composites was improved, although the addition of functionalized fillers decreased the degree of crystallinity of the PE to a small extent. The Young's modulus and yield strength of the composites increased from 6.6 to 19.1 % and 4.0-6.0 %, respectively, supporting the existence of strong filler-matrix interactions, contributing to an efficient load transfer. Finite element analysis of thermal stresses indicated absence of plastic deformation of the matrix or fracture of the nanofillers, for a 100 K temperature drop. © 2014 Springer Science+Business Media New York.