Regresar

On the explicit expressions for the determination of the friction factor in turbulent regime

Abstract:

Pressure failure in pipelines is commonly calculated by the Darcy-Weisbach formula. To use this formula, the Darcy’s hydraulic friction factor must be known. The best approximation for the Darcy’s friction coeﬃcient in turbulent ﬂow regime, is expressed by the Colebrook-White equation. This equation can only be solved by numerical methods, because it is implicit for the friction coeﬃcient. There are other approximate explicit models for the calculation with diﬀerent relative errors in comparison to the Colebrook-White equation. In this work, a review of the friction factor explicit correlations is made including, for the ﬁrst time in an article of this type, 48 equations, 10 of them that had not been reported previously and other explicit equations whose precision does not agree with previous reports or had not been included in review articles on this topic. The precision of these equations was determined by means of the maximum relative error for Reynolds numbers and relative roughness, considered as the equation’s application range. As a result of this work, the evaluation and selection criteria to use the explicit expressions for the calculation of the friction coeﬃcient in turbulent regime is oﬀered to engineering professionals and Students.