Regresar

Overland water flow and solute transport: Model development and field-data analysis

Abstract:

The application of plant nutrients with irrigation water is an efficient and cost-effective method for fertilizer application to enhance crop production and reduce or eliminate potential environmental problems related to conventional application methods. In this study, a combined overland water flow and solute transport model for analysis and management of surface fertigation/chemigation is presented. Water flow is pbkp_redicted with the well-known Saint-Venant's equations using a control volume of moving cells, while solute transport is modeled with the advection-dispersion equation. The ID transport equation was solved using a Crank-Nicholson finite-difference scheme. Four, large-scale, field experiments were conducted on blocked-end and free draining furrows to calibrate and verify the proposed model. The results showed that application of solute during the entire irrigation event, or during the second half of the irrigation for blocked end conditions with appropriate inflow rates, produced higher solute uniformity than application of solute during the first half of the irrigation event. Measured fertilizer distribution uniformity of the low quarter ranged from 21 to 76% while fertilizer distribution uniformity of the low half values varied between 62 to 87%. The model was subsequently applied to the experimental data; results showed good agreement with all field data. Water balance errors for the different experiments varied from 0.004 to 1.8%, whereas fertilizer mass balance errors ranged from 1.2 to 3.6%. A sensitivity analysis was also performed to assess the effects of longitudinal dispersivity parameter on overland solute concentrations. A value of 10 cm for dispersivity provided a reasonable fit to the experimental data.