Regresar

PVD coatings influence (TiCN, BCN, and CrAlN) on the fatigue life behavior of AISI 1045 steel for automotive applications

Abstract:

This work evaluated the influence of titanium carbo-nitride (TiCN), chromium aluminum nitride (CrAlN), and boron carbo-nitride (BCN) coatings deposited on AISI 1045 steel and their behavior in fatigue life. Suitable deposition parameters were established to obtain appropriate deposition times for polycrystalline growth and desired stoichiometry, as well as a stable layer thickness of ~ 3 μm. The physical and chemical properties of the obtained coatings were established by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and nanoindentation. Scanning electron microscopy (SEM) was used for analyzing the fracture surfaces of the samples subjected to fatigue. The analysis of the fatigue behavior of the uncoated and coated substrates was performed under rotary bending conditions applying maximum alternating stresses in the interval of 55 to 70% of the ultimate strength value, i.e., from 479 to 610 MPa, respectively. The test was conducted at room temperature. It was established that the fatigue resistance properties increased for the three types of coated samples, TiCN, BCN, and CrAlN, with values of 9.6%, 4.2%, and 3.9%, respectively, calculated for 1 × 106 cycles. The highest value in fatigue life improvement corresponded to the TiCN coating. This is associated with the increase in the mechanical properties of the coating, as well as the lower presence of tensile type stresses. The mechanical and fatigue results found in these ternary coatings deposited on AISI 1045 steel open up the possibility of future applications in mechanical devices, e.g., automotive applications with high fatigue demands in service conditions.