Regresar

A Special Application Criterion of the Nine-Switch Converter with Reduced Conduction Loss

Abstract:

The nine-switch converter is a multiport converter having two three-phase terminals and a dc-link, just like a 12-switch back-to-back (BTB) converter, but with 25% reduction of active switch count. However, the reduction from 12-switch to 9-switch may not always be an efficient choice considering losses in the switches. Only the load-source combination for the ac-ac common frequency mode and the source-source combination for the ac-dc different frequency (ac-dc DF) mode have been reported, so far, to yield relatively lower loss for the nine-switch converter. This paper shows that the nine-switch converter can have relatively lower loss even with a load-source combination, instead of only source-source combination in its ac-dc DF mode - when the upper terminal is connected to a dc load and the lower terminal is connected to an ac source. Mathematical proof is presented with derivation of the particular operating parameters for which the nine-switch converter will have comparatively lower losses. The analysis is validated with simulation and experimental results of a 1-kW system. Finally, the benchmark of the application criteria of the nine-switch converter for having lower conduction loss than the BTB converter is updated in this paper.