Regresar

Corrosion nature in [con/aln]n multilayers obtained from laser ablation

Abstract:

The aim of this work is the improvement of the electrochemical behavior of industrial steel using [CoN/AlN]n multilayered system via reactive Pulsed Laser Deposition (PLD) technique with a Nd: YAG laser (λ = 1064 nm) on Silicon (100) and AISI 302 steel substrates. In this work was varied systematically the bilayer period (Λ) and the coatings were characterized by X‐ray diffrac-tion (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and the chemical composition was determined by means of X‐ray photoelectron spectroscopy (XPS). The maximum corrosion resistance for the coating with (Λ) equal to 34.7 nm, corresponding to n = 30 bilayered. The polarization resistance and corrosion rate were around 7.62 × 105 kOhm × cm2 and 7.25 × 10−5 mm/year, these values were 6.3 × 105 and 78.6 times better than those showed by the uncoated 302 stainless steel substrate (1.2 kOhm × cm2 and 0.0057 mm/year), respectively. The improvement of the electrochemical behavior of the steel 302 coated with this [CoN/AlN]n can be attributed to the presence of several interfaces that act as obstacles for the inward and outward diffusions of Cl‐ ions, generating an increment in the corrosion resistance. The electrochemical results found in the [CoN/AlN]n open a possibility of future applications in mechanical devices that require high demands in service conditions.