Mostrando 10 resultados de: 15
Subtipo de publicación
Article(15)
Área temáticas
Física aplicada(9)
Ingeniería y operaciones afines(4)
Instrumentos de precisión y otros dispositivos(3)
Tecnología de otros productos orgánicos(3)
Aceites, grasas, ceras y gases industriales(2)
Characterization of fabrication process of micropores on silicon substrate by electrochemical method
ArticleAbstract: In the present work, the fabrication process of a set of micropores on crystalline silicon wafers maPalabras claves:Biological sensors, Macropores, silicon, Wet etchingAutores:Der M., Diéguez M.J., Fernandez T., Golmar F., Granell P., Gustavo Iván Rosero Yañez, Lasorsa C., Lerner B., Olmos C.M., Perez M.S., Sacco F., Santizo I.Fuentes:scopusBioremediation on a chip: A portable microfluidic device for efficient screening of bacterial biofilm with polycyclic aromatic hydrocarbon removal capacity
ArticleAbstract: Polycyclic aromatic hydrocarbons (PAHs) are pollutants of critical environmental and public health cPalabras claves:Continuous flow, Degrading bacteria, lab on a chip, Microbioreactor, PAHs biodegradationAutores:Alessandrello M., Bhansali S., Booth R., Bourguignon N., Ferrero M., Juárez Tomás M.S., Lerner B., Lobo C.B., Luis Cumbal, Professor, Luis H. Cumbal, Perez M.S.Fuentes:googlescopusCost-effective fabrication of photopolymer molds with multi-level microstructures for pdms microfluidic device manufacture
ArticleAbstract: This paper describes a methodology of photopolymer mold fabrication with multi-level microstructuresPalabras claves:Autores:Andrea V. Vaca, Carlos R. Arroyo, Debut Alexis, Follo M., Gustavo Iván Rosero Yañez, Karla Vizuete, Lerner B., Luis H. Cumbal, Mertelsmann R., Olmos C.M., Penãherrera A., Perez M.S., Ruarte D.Fuentes:scopusAccessible and Cost-Effective Method of PDMS Microdevices Fabrication Using a Reusable Photopolymer Mold
ArticleAbstract: This work describes a novel and cost-effective method of polydimethylsiloxane (PDMS) microchips fabrPalabras claves:enhanced oil recovery, PDMS microchips fabrication, printing plate photopolymer moldAutores:Bourguignon N., Carlos R. Arroyo, Gustavo Iván Rosero Yañez, Karla Vizuete, Lasorsa C., Lerner B., Luis H. Cumbal, Olmos C.M., Penãherrera A., Perez M.S., Pineda P., Sierra-Rodero M.Fuentes:scopusDesign and analysis of different models of microfluidic devices evaluated in enhanced oil recovery (EOR) assays
ArticleAbstract: Microfluidic devices are a new platform for Enhanced Oil Recovery (EOR) assays. The application of CPalabras claves:EOR, Microfuidic devices, Microgels and polymers, Poral volumeAutores:Boschan A., Golmar F., Granell P., Gustavo Iván Rosero Yañez, Lasorsa C., Lerner B., Olmos C.M., Penãherrera A., Perez M.S.Fuentes:scopusGEMA—An Automatic Segmentation Method for Real-Time Analysis of Mammalian Cell Growth in Microfluidic Devices
ArticleAbstract: Nowadays, image analysis has a relevant role in most scientific and research areas. This process isPalabras claves:apoptosis process, biological image segmentation, linear regression, Real-Time AnalysisAutores:Delrieux C., Lerner B., Macote-Yparraguirre E., Mertelsmann R., Miriuka S., Perez M.S., Pérez‐sosa C., Ramiro Fernando Isa-Jara, Revollo N.Fuentes:scopusEpoxy resin mold and PDMS microfluidic devices through photopolymer flexographic printing plate
ArticleAbstract: Photopolymer flexographic printing plate is a new photopolymeric material used for microdevices fabrPalabras claves:Epoxy resin, Microdroplets generation, microfluidics, PDMS microdevice, Photopolymer flexographicAutores:Andrea V. Vaca, Carlos R. Arroyo, de Sá Carneiro I., Debut Alexis, Gustavo Iván Rosero Yañez, Karla Sofía Vizuete Armendáriz, Karla Vizuete, Lerner B., Luis Cumbal, Professor, Luis H. Cumbal, Olmos C.M., Penãherrera A., Perez C., Perez M.S.Fuentes:googlescopusEvaluation of cell culture in microfluidic chips for application in monoclonal antibody production
ArticleAbstract: Microfluidic chips are useful devices for cell culture that allow cell growth under highly controllePalabras claves:cell culture, HEK-293T cells, lab on a chip, Microchannel, MicrofluidicAutores:Gustavo Iván Rosero Yañez, Helguera G., Lerner B., Payés C., Penãherrera A., Perez M.S., Sierra-Rodero M., Vega M.Fuentes:scopusNovel Reproducible Manufacturing and Reversible Sealing Method for Microfluidic Devices
ArticleAbstract: Conventional manufacturing methods for polydimethylsiloxane (PDMS)‐based microdevices require multipPalabras claves:microdroplets, PMMA plates, reusable microdevice, reversible sealingAutores:Aravelli A., Bhansali S., Bourguignon N., Gustavo Iván Rosero Yañez, Lerner B., Peñaherrera‐pazmiño A.B., Perez M.S., Pérez‐sosa C.Fuentes:scopusHybrid microchannel-solid state micropore device for fast and optical cell detection
ArticleAbstract: This paper presents a methodology for cell detection and counting using a device that combines PDMSPalabras claves:Autores:Booth R., Cabaleiro J.M., Debut Alexis, Der M., Fernández-Cabada T., Gustavo Iván Rosero Yañez, Lerner B., Luis Cumbal, Professor, Luis H. Cumbal, Olmos C.M., Perez M.S.Fuentes:googlescopus