Mostrando 7 resultados de: 7
Filtros aplicados
Publisher
John Wiley & Sons, Inc.(2)
RSC Advances(2)
Biomimetics(1)
Chemosphere(1)
Journal of Applied Polymer Science(1)
Área temáticas
Física aplicada(5)
Ingeniería y operaciones afines(3)
Tecnología de otros productos orgánicos(3)
Imprenta y actividades conexas(2)
Instrumentos de precisión y otros dispositivos(2)
Área de conocimiento
Ciencia de materiales(4)
Ingeniería de manufactura(2)
Microestructura(2)
Biología celular(1)
Biomateriales(1)
Objetivos de Desarrollo Sostenible
ODS 9: Industria, innovación e infraestructura(7)
ODS 3: Salud y bienestar(6)
ODS 12: Producción y consumo responsables(5)
ODS 7: Energía asequible y no contaminante(2)
ODS 17: Alianzas para lograr los objetivos(1)
Origen
scopus(7)
Cost-effective fabrication of photopolymer molds with multi-level microstructures for pdms microfluidic device manufacture
ArticleAbstract: This paper describes a methodology of photopolymer mold fabrication with multi-level microstructuresPalabras claves:Autores:Andrea V. Vaca, Carlos R. Arroyo, Debut Alexis, Follo M., Gustavo Iván Rosero Yañez, KARLA SOFÍA VIZUETE ARMENDÁRIZ, Lerner B., Luis Cumbal, Professor, Luis H. Cumbal, Mertelsmann R., Olmos C.M., Penãherrera A., Perez M.S., Ruarte D.Fuentes:googlescopusBioremediation on a chip: A portable microfluidic device for efficient screening of bacterial biofilm with polycyclic aromatic hydrocarbon removal capacity
ArticleAbstract: Polycyclic aromatic hydrocarbons (PAHs) are pollutants of critical environmental and public health cPalabras claves:Continuous flow, Degrading bacteria, lab on a chip, Microbioreactor, PAHs biodegradationAutores:Alessandrello M., Bhansali S., Booth R., Bourguignon N., Ferrero M., Juárez Tomás M.S., Lerner B., Lobo C.B., Luis Cumbal, Professor, Luis H. Cumbal, Perez M.S.Fuentes:googlescopusAccessible and Cost-Effective Method of PDMS Microdevices Fabrication Using a Reusable Photopolymer Mold
ArticleAbstract: This work describes a novel and cost-effective method of polydimethylsiloxane (PDMS) microchips fabrPalabras claves:enhanced oil recovery, PDMS microchips fabrication, printing plate photopolymer moldAutores:Bourguignon N., Carlos R. Arroyo, Gustavo Iván Rosero Yañez, KARLA SOFÍA VIZUETE ARMENDÁRIZ, Lasorsa C., Lerner B., Luis Cumbal, Professor, Luis H. Cumbal, Olmos C.M., Penãherrera A., Perez M.S., Pineda P., Sierra-Rodero M.Fuentes:googlescopusEpoxy resin mold and PDMS microfluidic devices through photopolymer flexographic printing plate
ArticleAbstract: Photopolymer flexographic printing plate is a new photopolymeric material used for microdevices fabrPalabras claves:Epoxy resin, Microdroplets generation, microfluidics, PDMS microdevice, Photopolymer flexographicAutores:Andrea V. Vaca, Carlos R. Arroyo, de Sá Carneiro I., Debut Alexis, Gustavo Iván Rosero Yañez, Igor de Sá Carneiro, KARLA SOFÍA VIZUETE ARMENDÁRIZ, Lerner B., Luis Cumbal, Professor, Luis H. Cumbal, Olmos C.M., Penãherrera A., Perez C., Perez M.S.Fuentes:googlescopusHybrid microchannel-solid state micropore device for fast and optical cell detection
ArticleAbstract: This paper presents a methodology for cell detection and counting using a device that combines PDMSPalabras claves:Autores:Booth R., Cabaleiro J.M., Debut Alexis, Der M., Fernández-Cabada T., Gustavo Iván Rosero Yañez, Lerner B., Luis Cumbal, Professor, Luis H. Cumbal, Olmos C.M., Perez M.S.Fuentes:googlescopusInfluence of thermal treatment and aging time on the stability and swelling properties of nano/micron‐sized polymeric spheres for improved oil recovery application
OtherAbstract: Understanding the knowledge of swelling and stability properties of polymeric spheres are essentialPalabras claves:improved oil recovery, microdevice, polymeric spheres, stability, swellingAutores:Andrea V. Vaca, Debut Alexis, Gustavo Iván Rosero Yañez, Hernandez M.I., KARLA SOFÍA VIZUETE ARMENDÁRIZ, Lasorsa C., Lerner B., Luis Cumbal, Professor, Luis H. Cumbal, Masiero D., Olmos C.M., Penãherrera A., Perez M.S.Fuentes:googlescopusSimple Microcontact Printing Technique to Obtain Cell Patterns by Lithography Using Grayscale, Photopolymer Flexographic Mold, and PDMS
ArticleAbstract: Microcontact printing using PDMS embossing tools and its variations have aroused the interest of a wPalabras claves:3D patterns, contact printing, flexographic photopolymer mold, grayscale, PDMS stampAutores:Bhansali S., Bourguignon N., Carlos R. Arroyo, Debut Alexis, Gimenez R., Lerner B., Miriuka S., Perez M.S., Pérez‐sosa C.Fuentes:googlescopus