Mostrando 10 resultados de: 14
Filtros aplicados
Publisher
Polymers(5)
Rapid Prototyping Journal(2)
3D Printing and Additive Manufacturing(1)
Annual Technical Conference - ANTEC, Conference Proceedings(1)
Dyna (Spain)(1)
Área temáticas
Tecnología de otros productos orgánicos(10)
Ingeniería y operaciones afines(8)
Metalurgia y productos metálicos primarios(6)
Física aplicada(4)
Dibujo técnico, materiales peligrosos(2)
Effect of Infill Parameters on Tensile Mechanical Behavior in Desktop 3D Printing
ArticleAbstract: The recent creation and growth of desktop three-dimensional (3D) printing has led to a new way of buPalabras claves:3D Printing, FDM, Fused filament fabrication, Infill pattern, Mechanical strength, MesostructureAutores:Conejero A., Fernandez-Vicente M., Ferrandiz-Bou S., Wilson CalleFuentes:scopusEffect of Maleinized Linseed Oil (MLO) on thermal and rheolological properties of PLA/MWCNT and PLA/HNT nanocomposites for additive manufacturing
ArticleAbstract: Purpose: This paper aims to describe the influence of maleinized linseed oil (MLO), when used as a lPalabras claves:3D Printing, additive manufacturing, carbon nanotubes, Halloysite nanotubes, Maleinized linseed oil, Polylactic acid, Rheological, thermalAutores:Christian Mauricio Cobos, Fenollar O., Ferrandiz-Bou S., Garzón L., López-Martínez J., Luis Eduardo Garzón MuñozFuentes:googlescopusEffect of infill parameters on mechanical properties in additive manufacturing
ArticleAbstract: The purpose of this paper is to study and outline the effects of infill parameters (percentage and pPalabras claves:additive manufacturing, Fused deposition modelÂling, Infill pattern, Infill percentage, PlaAutores:Boronat T., Diego Lascano, Ferrandiz-Bou S., Ivorra-Martínez J., Quiles‐carrillo L.Fuentes:scopusDynamic–mechanical and decomposition properties of flax/basalt hybrid laminates based on an epoxidized linseed oil polymer
ArticleAbstract: This contribution focuses on the development of flax and flax/basalt hybrid reinforced composites baPalabras claves:Basalt, Dynamic–mechanical, Epoxidized linseed oil (ELO), flax, Green composites, massAutores:Balart R., Ferrandiz-Bou S., García-García D., José Miguel Ferri, Motoc D.L.Fuentes:scopusNew materials for 3D-printing based on polycaprolactone with gum rosin and beeswax as additives
ArticleAbstract: In this work, different materials for three-dimensional (3D)-printing were studied, which based on pPalabras claves:3D-printing, beeswax, Gum rosin, Natural additives, PolycaprolactoneAutores:Cristina Pavon, Ferrandiz-Bou S., López-Martínez J., Miguel Fernando Aldas CarrascoFuentes:scopusInfluence of the addition of 0.5 and 1% in weight of multi-wall carbon nanotubes (MWCNTs) in poly-lactic acid (PLA) for 3D printing
Conference ObjectAbstract: This research paper presents the characterization of a nanocomposite of polylactic acid (PLA) and caPalabras claves:3D Printing, FFF, PLA/MWCNTAutores:Christian Mauricio Cobos, Conejero A., Fenollar O., Ferrandiz-Bou S.Fuentes:googlescopusMechanical recycling of partially bio-based and recycled polyethylene terephthalate blends by reactive extrusion with poly(styrene-co-glycidyl methacrylate)
ArticleAbstract: In the present study, partially bio-based polyethylene terephthalate (bio-PET) was melt-mixed at 15-Palabras claves:Bio-PET, Chain extenders, Food packaging, r-PET, Reactive extrusion, Secondary recyclingAutores:Boronat T., Diego Lascano, Ferrandiz-Bou S., Martinez-Sanz A.V., Montanes N., Montava-Jorda S., Quiles‐carrillo L., Torres-Giner S.Fuentes:scopusMechanical, Dynamic-Mechanical, Thermal and Decomposition Behavior of 3D-Printed PLA Reinforced with CaCO<inf>3</inf> Fillers from Natural Resources
ArticleAbstract: This study evaluates the effect of CaCO3 fillers extracted from waste eggshells on 3Dprinted PLA perPalabras claves:3D-printing, biological filler, decomposition, dynamic-mechanical, mechanical, PLA polymer, surface appearance, thermal, WettabilityAutores:Cristina Pavon, Ferrandiz-Bou S., López-Martínez J., María Dolores Samper, Miguel Fernando Aldas Carrasco, Motoc D.L.Fuentes:scopusPbkp_rediction of properties value in thermoplastic mixtures applying box equivalent model incompatibility in recycled polymer blends
ArticleAbstract: The usefulness of a theoretical model of behavior of a mixture of materials is given by the abilityPalabras claves:blends, Box model, Mechanical properties, Miscibility, Polymeric materialsAutores:Ferrandiz-Bou S., Lopez-Martinez J., María Dolores Samper, Patricia Arrieta M.Fuentes:scopusStudy of thermal and rheological properties of PLA loaded with carbon and halloysite nanotubes for additive manufacturing
ArticleAbstract: Purpose: This paper aims to propose using polylactic acid (PLA) as an alternative to nanocompositesPalabras claves:3D Printing, additive manufacturing, carbon nanotubes, Halloysites nanotubes, Rheological, Thermal testingAutores:Christian Mauricio Cobos, Fenollar O., Ferrandiz-Bou S., Garzón L., Lopez-Martinez J., Luis Eduardo Garzón MuñozFuentes:googlescopus