Mostrando 5 resultados de: 5
Filtros aplicados
Área temáticas
Metalurgia y productos metálicos primarios(3)
Tecnología de otros productos orgánicos(3)
Física aplicada(2)
Cirugía y especialidades médicas afines(1)
Fabricación(1)
Effect of Maleinized Linseed Oil (MLO) on thermal and rheolological properties of PLA/MWCNT and PLA/HNT nanocomposites for additive manufacturing
ArticleAbstract: Purpose: This paper aims to describe the influence of maleinized linseed oil (MLO), when used as a lPalabras claves:3D Printing, additive manufacturing, carbon nanotubes, Halloysite nanotubes, Maleinized linseed oil, Polylactic acid, Rheological, thermalAutores:Christian Mauricio Cobos, Fenollar O., Ferrandiz-Bou S., Garzón L., López-Martínez J., Luis Eduardo Garzón MuñozFuentes:googlescopusEffect of infill parameters on mechanical properties in additive manufacturing
ArticleAbstract: The purpose of this paper is to study and outline the effects of infill parameters (percentage and pPalabras claves:additive manufacturing, Fused deposition modelÂling, Infill pattern, Infill percentage, PlaAutores:Boronat T., Diego Lascano, Ferrandiz-Bou S., Ivorra-Martínez J., Quiles‐carrillo L.Fuentes:scopusNew materials for 3D-printing based on polycaprolactone with gum rosin and beeswax as additives
ArticleAbstract: In this work, different materials for three-dimensional (3D)-printing were studied, which based on pPalabras claves:3D-printing, beeswax, Gum rosin, Natural additives, PolycaprolactoneAutores:Cristina Pavon, Ferrandiz-Bou S., López-Martínez J., Miguel Fernando Aldas CarrascoFuentes:scopusMechanical design of a knee prosthesis for transfemoral amputation
Conference ObjectAbstract: In the present investigation, the design and simulation of a polycentric knee mechanism with four-baPalabras claves:knee, Polycentric mechanism, Prototype, Simulation, stability, Transfemoral, Voluntary controlAutores:Christian Mauricio Cobos Maldonado, Fernando Vladimir Pintado Albarracin, Ferrandiz-Bou S., Gustavo Fernando Vintimilla LeónFuentes:scopusMechanical recycling of partially bio-based and recycled polyethylene terephthalate blends by reactive extrusion with poly(styrene-co-glycidyl methacrylate)
ArticleAbstract: In the present study, partially bio-based polyethylene terephthalate (bio-PET) was melt-mixed at 15-Palabras claves:Bio-PET, Chain extenders, Food packaging, r-PET, Reactive extrusion, Secondary recyclingAutores:Boronat T., Diego Lascano, Ferrandiz-Bou S., Martinez-Sanz A.V., Montanes N., Montava-Jorda S., Quiles‐carrillo L., Torres-Giner S.Fuentes:scopus