Mostrando 10 resultados de: 13
Filtros aplicados
Publisher
Inorganic Materials(2)
Construction and Building Materials(1)
High Temperatures - High Pressures(1)
Journal of Applied Physics(1)
Journal of Materials Research(1)
Área temáticas
Química inorgánica(5)
Química física(4)
Metalurgia y productos metálicos primarios(2)
Tecnología de otros productos orgánicos(2)
Física aplicada(1)
Área de conocimiento
Ciencia de materiales(13)
Nanostructura(2)
Vidrio(2)
Nanopartícula(1)
Química inorgánica(1)
Origen
scopus(13)
Characterization of carbon films microstructure by atomic force microscopy and Raman spectroscopy
ArticleAbstract: Atomic force microscopy has been used to study the surface irregularities of hydrogenated and unhydrPalabras claves:Autores:González-Hernandez J., López-Cruz E., Martin Yañez-Limon, Ruiz F., Vázquez-López C.Fuentes:scopusA microscopic model for the thermal conductivity of a porous 380-aluminium alloy
ArticleAbstract: The effective values of thermal diffusivity, specific heat, and thermal conductivity of a porous 380Palabras claves:Autores:Espinoza-Beltran F.J., González-Hernandez J., Martin Yañez-Limon, Ramírez A.M., Vorobiev Y.V.Fuentes:scopusDevelopment and characterization of an inorganic foam obtained by using sodium bicarbonate as a gas generator
ArticleAbstract: In the construction industry almost all of the insulating and expansive materials are organic foams.Palabras claves:Ceramic material, Microstructural characterization, Thermal analysisAutores:Alonso-Guzmán E., Contreras-García M., González-Hernandez J., Manzano-Ramírez A., Martin Yañez-Limon, Rubio-Avalos J.Fuentes:scopusFormation of Ag-Cu nanoparticles in SiO<inf>2</inf> films by sol-gel process and their effect on the film properties
Conference ObjectAbstract: Sol-gel thin films and microcrystalline powders of SiO2 doped with Ag and Cu were obtained under envPalabras claves:Autores:Díaz-Flores L.L., Garnica-Romo M.G., González-Hernandez J., Martin Yañez-Limon, Vorobiev P., Vorobiev Y.V.Fuentes:scopusEffects of porosity on the thermal properties of a 380-aluminum alloy
ArticleAbstract: Effective values of the thermal diffusivity, specific heat, and thermal conductivity of a porous 380Palabras claves:Autores:Espinoza-Beltran F.J., González-Hernandez J., Hallen J.M., Martin Yañez-Limon, Ramírez A.M., Vorobiev Y.V.Fuentes:scopusOptical Characterization of Fe- and Cu-Doped Silicon Oxide Glasses Prepared by the Sol-Gel Method
ArticleAbstract: Thin SiO2 films were obtained by the sol-gel process involving the solidification (gelation) of a spPalabras claves:Autores:Espinoza-Beltran F.J., Garcia-Cerda L.A., García-Rodríguez F.J., González-Hernandez J., Martin Yañez-Limon, Pérez-Roblez J.F., Vorobiev Y.V.Fuentes:scopusOptical phonons in SiO<inf>2</inf> sol-gel derived colored glasses doped with Cu and Fe
ArticleAbstract: Optical phonons in SiO2 samples prepared by the sol-gel method and colored by doping with Fe and CuPalabras claves:Autores:Espinoza-Beltran F.J., Garcia-Cerda L.A., González-Hernandez J., Martin Yañez-Limon, Méndez-Nonell J., Parga-Torres J.R., Pérez-Robles J.F., Ruiz F., Vorobiev Y.V.Fuentes:scopusUse of thermal lens spectroscopy to measure the thermal diffusivity, during the gelation process, of sol-gel materials added with Mn
Conference ObjectAbstract: The thermal diffusivity of sol-gel materials added with Mn was measured using thermal lens spectroscPalabras claves:Autores:Espinoza-Beltran F.J., González-Hernandez J., Martin Yañez-Limon, Martínez-Flores J.Fuentes:scopusSilicon nanoclusters in Si-SiO<inf>2</inf> system
ArticleAbstract: Low concentration of Si nanoparticles (n-Si) produced by a ball milling method were introduced intoPalabras claves:Autores:Díaz-Flores L.L., Espinoza-Beltran F.J., González-Hernandez J., Martin Yañez-Limon, Morales-Hernández J., Rodríguez-Melgarejo F., Vorobiev Y.V.Fuentes:scopusQualitative evaluation of sol-gel SiO<inf>2</inf> as a protective layer for soft surfaces
ArticleAbstract: In this paper, it is shown that siO2 sol-gel coatings deposited on glass and acrylic substrates (polPalabras claves:[B] abrasive test, [B] atomic force microscopy, [D] polymethyl methacrylate, [D] silicon oxideAutores:Díaz-Flores L.L., Espinoza-Beltran F.J., González-Hernandez J., Martin Yañez-Limon, Mendoza-Galván A., Ramírez-Bon R.Fuentes:scopus