Mostrando 10 resultados de: 29
Filtros aplicados
Subtipo de publicación
Article(29)
Publisher
Polymers(14)
Macromolecular Materials and Engineering(3)
Fibers and Polymers(2)
Materials(2)
Applied Sciences (Switzerland)(1)
Área temáticas
Tecnología de otros productos orgánicos(15)
Ingeniería y operaciones afines(14)
Fabricación(9)
Ingeniería química(5)
Textiles(5)
Área de conocimiento
Ciencia de materiales(23)
Material compuesto(17)
Ingeniería ambiental(7)
Polímero(5)
Cinética química(2)
Esters of Cinnamic Acid as Green Plasticizers for Polylactide Formulations with Improved Ductility
ArticleAbstract: This study demonstrates the potential of different cinnamate esters, namely methyl trans-cinnamate (Palabras claves:Ductility, plasticizers, Polylactide, Reactive extrusion, terpenoidsAutores:Barandiaran A., Diego Lascano, Fenollar O., Gomez-Caturla J., Ivorra-Martínez J., Moreno V., Selles M.A.Fuentes:scopusEvaluation of different compatibilization strategies to improve the performance of injection-molded green composite pieces made of polylactide reinforced with short flaxseed fibers
ArticleAbstract: Green composites made of polylactide (PLA) and short flaxseed fibers (FFs) at 20 wt % were successfuPalabras claves:Fiber pretreatment, flax, Green composites, Pla, Reactive extrusionAutores:Agüero Á., Diego Lascano, Fenollar O., García-Sanoguera D., Ivorra-Martínez J., Sandra Rojas-Lema, Torres-Giner S.Fuentes:scopusFunctionalization of partially bio-based poly(ethylene terephthalate) by blending with fully bio-based poly(amide) 10,10 and a glycidyl methacrylate-based compatibilizer
ArticleAbstract: This work shows the potential of binary blends composed of partially bio-based poly(ethyelene terephPalabras claves:bio-based, compatibilization, Mechanical properties, MORPHOLOGY, Poly(amide) 1010-PA1010, Poly(ethyelene terephthalate)-PET, Xibond™ 920Autores:Balart R., Diego Lascano, Jorda M., Montanes N., Montava-Jorda S., Quiles‐carrillo L.Fuentes:scopusEffect of infill parameters on mechanical properties in additive manufacturing
ArticleAbstract: The purpose of this paper is to study and outline the effects of infill parameters (percentage and pPalabras claves:additive manufacturing, Fused deposition modelÂling, Infill pattern, Infill percentage, PlaAutores:Boronat T., Diego Lascano, Ferrandiz-Bou S., Ivorra-Martínez J., Quiles‐carrillo L.Fuentes:scopusDevelopment and Characterization of Environmentally Friendly Insulation Materials for the Building Industry from Olive Pomace Waste
ArticleAbstract: This work is focused on the upgrading olive oil pomace to obtain high environmentally friendly insulPalabras claves:Composite material, insulating material, Non-woven, Olive pomace waste, Wet-laidAutores:Balart R., Diego Lascano, Fages E., Gutierrez O., Quiles‐carrillo L., Sánchez-Nácher L.Fuentes:scopusDevelopment and Characterization of Polylactide Blends with Improved Toughness by Reactive Extrusion with Lactic Acid Oligomers
ArticleAbstract: In this work, we report the development and characterization of polylactide (PLA) blends with improvPalabras claves:environmentally friendly, improved toughness, lactic acid oligomer (OLA), maleinized linseed oil (MLO), polylactide (PLA), Reactive extrusionAutores:Diego Lascano, Fiori S., García-Sanoguera D., Gomez-Caturla J., Montanes N., Quiles‐carrillo L., Tejada-Oliveros R.Fuentes:scopusDevelopment and evaluation of novel nanofibers based on mango kernel starch obtained by electrospinning
ArticleAbstract: This work reports on the development of fibers based on natural mango kernel starch (MKS) with diamePalabras claves:Electrospinning, Mango kernel starch, nanofibers, PVA, PVPAutores:Balart R., Diego Lascano, Dominici F., García-García D., Gomez-Caturla J., Ivorra-Martínez J., Puglia D., Torre L.Fuentes:scopusDevelopment of injection-molded polylactide pieces with high toughness by the addition of lactic acid oligomer and characterization of their shape memory behavior
ArticleAbstract: This work reports the effect of the addition of an oligomer of lactic acid (OLA), in the 5-20 wt% raPalabras claves:Impact modifier, OLA, Packaging applications, Pla, Shape memoryAutores:Balart R., Boronat T., Diego Lascano, Ivorra-Martínez J., Moraga G., Quiles‐carrillo L., Sandra Rojas-Lema, Torres-Giner S.Fuentes:scopusA comparative study of mechanical properties of polylactide bio-composites with woven and non-woven jute reinforcements
ArticleAbstract: The concern that has arisen in recent years over the excessive use of oil-based materials has made tPalabras claves:Autores:Aljaro C., Diego Lascano, Fages E., Ivorra-Martínez J., Montanes N., Sandra Rojas-LemaFuentes:scopusImproved Performance of Environmentally Friendly Blends of Biobased Polyethylene and Kraft Lignin Compatibilized by Reactive Extrusion with Dicumyl Peroxide
ArticleAbstract: In this work, different contents (0.25, 0.50, 0.75, and 1 phr) of dicumyl peroxide (DCP) are incorpoPalabras claves:bio-polyethylene, blends, dicumyl peroxide, kraft lignin, reactive compatibilizationAutores:Balart R., Diego Lascano, García-García D., Ivorra-Martínez J., Sandra Rojas-LemaFuentes:scopus