Mostrando 10 resultados de: 12
Filtros aplicados
Publisher
2007 Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2007(1)
2016 IEEE Ecuador Technical Chapters Meeting, ETCM 2016(1)
2017 IEEE 2nd Ecuador Technical Chapters Meeting, ETCM 2017(1)
2020 IEEE ANDESCON, ANDESCON 2020(1)
Advances in Intelligent Systems and Computing(1)
Área temáticas
Ingeniería y operaciones afines(7)
Otras ramas de la ingeniería(5)
Física aplicada(4)
Fisiología humana(3)
Medicina y salud(2)
Área de conocimiento
Ingeniería mecánica(6)
Análisis numérico(1)
Biomateriales(1)
Dinámica de fluidos(1)
Factores humanos y ergonomía(1)
Origen
scopus(12)
Determination of converge parameters for Monte Carlo experiments in the simulation of the failure of bone tissue
Conference ObjectAbstract: The Monte Carlo method is widely used in the field of biomechanics to study the variability of diverPalabras claves:bone failure, confidence level, convergence criterion, Monte CarloAutores:Casanova-Medina E., Ing. Thalía San Antonio, PhD., Marco A. Ciaccia Sortino, Müller-Karger C., Thalía San AntonioFuentes:googlescopusErgonomic Methods Adaptation for Risk Evaluation Associated to Musculoskeletal Disorders in Elderly Indigenous Women of the Ecuadorian Highlands
Conference ObjectAbstract: In Ecuador, agriculture is an activity of social and economic relevance perform mainly by indigenousPalabras claves:Ergonomic methods, INDIGENOUS WOMEN, Musculoskeletal disorders, REBAAutores:Alejandra Lascano, Anita Larrea, Marco A. Ciaccia Sortino, Thalía San AntonioFuentes:googlescopusDynamic compression plate design for forearm fractures using the boundary elements method
Conference ObjectAbstract: Currently, dynamic compression plates are widely used in internal fracture fixation processes. The pPalabras claves:Boundary Element Method, Dynamic compression plate, Elastostatic analysis, Iterative domain decompositionAutores:Brizeida N. Gámez, David Ojeda, Iván Iglesias Navarro, Marco A. Ciaccia SortinoFuentes:googlescopusNonlinear 3D Finite Element Formulation for the Analysis of Submarine Pipelines during Laying Operations
Conference ObjectAbstract: A new three-dimensional formulation using the finite element method is presented in this paper to anPalabras claves:Autores:Goncalves R., Marco A. Ciaccia Sortino, Martínez C.Fuentes:googlescopusOn the amount of air entrapment into finite length squeeze film dampers
Conference ObjectAbstract: Squeeze Film Dampers (SFDs) are routinely employed to reduce vibration amplitudes and isolate structPalabras claves:Autores:Díaz S., Marco A. Ciaccia Sortino, Méndez T., Torres J.Fuentes:googlescopusOn the numerical pbkp_rediction of finite length squeeze film dampers performance with free air entrainment
ArticleAbstract: Squeeze film dampers (SFDs) are commonly used in turbomachinery to dampen shaft vibrations in rotor-Palabras claves:Air entrapment, Dimensionless air entrainment map, Feed-squeeze flow number, Squeeze film dampersAutores:Díaz S., Marco A. Ciaccia Sortino, Méndez T., Torres J.Fuentes:googlescopusOrientation of orthotropic material properties in a femur FE model: A method based on the principal stresses directions
ArticleAbstract: Most work done on bone simulation has modeled the tissue as inhomogeneous and isotropic even thoughPalabras claves:Orthotropic axes orientation, Principal stress, proximal femur, Subject-specific bone FE model, Wolff's lawAutores:Casanova-Medina E., Ing. Thalía San Antonio, PhD., Marco A. Ciaccia Sortino, Müller-Karger C., Thalía San AntonioFuentes:googlescopusOsteosynthesis Device Evaluation Using the Boundary Elements Method
Conference ObjectAbstract: The elastic analysis of a dynamic compression plate (DCP) used for the forearm bone fracture reductiPalabras claves:Boundary Element Method, Dynamic compression plate, Elastostatic analysis, Iterative domain decompositionAutores:Brizeida N. Gámez, David Ojeda, Iván Iglesias Navarro, Marco A. Ciaccia SortinoFuentes:googlescopusImprovement of a knee prosthesis mechanism through experimental stress analysis and the finite element method
Conference ObjectAbstract: In this work, the improvement of a knee mechanism prosthesis is presented. The mechanism is oversizePalabras claves:EXPERIMENTAL, Optimization, Prosthesis, Simulation, ValidationAutores:Liseth Pasaguayo, Marco A. Ciaccia SortinoFuentes:googlescopusInfluence of modelling boundary conditions in the simulation of mechanical tests of bovine bones
ArticleAbstract: The aim of this work is to study the influence of different configurations of boundary conditions inPalabras claves:Bone models, bone tissue, boundary conditions, Finite element simulation, Mechanical testsAutores:Casanova-Medina E., Ing. Thalía San Antonio, PhD., Marco A. Ciaccia Sortino, Müller-Karger C., Thalía San AntonioFuentes:googlescopus