Mostrando 10 resultados de: 107
Publisher
Applied Physics A: Materials Science and Processing(7)
International Journal of Thermophysics(5)
Journal De Physique. IV : JP(5)
Journal of Applied Physics(5)
Journal of Materials Science: Materials in Electronics(4)
Área temáticas
Ingeniería y operaciones afines(63)
Física aplicada(34)
Química inorgánica(20)
Química física(18)
Tecnología de otros productos orgánicos(17)
Área de conocimiento
Ciencia de materiales(91)
Cerámico(12)
Biomateriales(8)
Material compuesto(8)
Bioquímica(6)
Origen
scopus(107)
Characterization and Quantification of the Phases Concentration of Cu60–Zn40 Alloy as Candidate Reference Material
ArticleAbstract: This study describes the process of evaluating a commercially available copper–zinc alloy with the gPalabras claves:Optical microscopy, Phase percentage, reference material, Scanning Electron Microscopy, X-ray fluorescenceAutores:Herrera-Basurto R., Juárez-García J.M., Manzano-Ramírez A., Martin Yañez-Limon, Mercader-Trejo F., Rodríguez-López A., Rojas-Chávez H.Fuentes:scopusCharacterization of carbon films microstructure by atomic force microscopy and Raman spectroscopy
ArticleAbstract: Atomic force microscopy has been used to study the surface irregularities of hydrogenated and unhydrPalabras claves:Autores:González-Hernandez J., López-Cruz E., Martin Yañez-Limon, Ruiz F., Vázquez-López C.Fuentes:scopusCharacterization of lead zirconate titanate (53/47) films fabricated by a simplified sol-gel acetic-acid route
ArticleAbstract: Lead zirconate titanate [PZT (53/47)] films (around 200 nm thick) were prepared by the sol-gel acetiPalabras claves:Autores:Espinoza-Beltran F.J., Herrera-Gomez A., K. M. Moya-Canul, López Beltrán A.M., Martin Yañez-Limon, Mayén-Mondragón R., Vazquez-Lepe M.Fuentes:scopusCharacterization of mechanical properties and electrochemical behaviour in a Hank's solution of 316L/Cr<inf>1-</inf><inf>x</inf>Al<inf>x</inf>N system
Conference ObjectAbstract: Cr1-xAlxN hard coatings were successfully deposited by R.F. reactive magnetron co-sputtering in an APalabras claves:Autores:Benitez-Castro A., Caicedo J.C., Giraldo-Betancur A.L., Martin Yañez-Limon, Mũoz-Saldãa J., Osorio D., Sanchéz O.M., William Arnulfo Ch Aperador, Zambrano G.Fuentes:scopusCharacterization of sol-gel glasses with different copper concentrations treated under oxidizing and reducing conditions
ArticleAbstract: Using the sol-gel process SiO2 coating and powdered samples doped with different concentrations of cPalabras claves:Autores:Espinoza-Beltran F.J., García-Rodríguez F.J., González-Hernandez J., Martin Yañez-Limon, Pérez-Robles J.F., Vorobiev Y.V.Fuentes:scopusChitosan-BaTiO<inf>3</inf> nanostructured piezopolymer for tissue engineering
ArticleAbstract: Herein we report the synthesis of a piezopolymer composed of chitosan (CS)/hydroxylated BaTiO3 (OH-BPalabras claves:BaTiO nanoparticles 3, Biocompatibility, Chitosan, nanocomposites, PiezoelectricAutores:Bárcenas G.L., España Sánchez B.L., Franco B., Hernández-Landaverde M.A., López R.A., Martin Yañez-Limon, Padilla-Vaca F., Prokhorov E.Fuentes:scopusComparative study of Al-doped ZnO films deposited by sol–gel and by sputtering using a sintered target from ZnO nanoparticles synthesized by sol–gel
ArticleAbstract: Al-doped zinc oxide (ZnO) films were deposited on glass substrates by radio frequency magnetron sputPalabras claves:Electrical resistivity, Sol–gel synthesis, Sputtering, Zinc oxide doped filmsAutores:García-Salinas F., Martin Yañez-Limon, Vázquez-Durán A.Fuentes:scopusAssessment of coconut fibre insulation characteristics and its use to modulate temperatures in concrete slabs with the aid of a finite element methodology
ArticleAbstract: This paper presents the assessment of coconut fibre thermal characteristics and its use to modulatePalabras claves:coconut, density, FEM, Fibre, Heat, Heat capacity, Insulation, thermal conductivityAutores:Feijoo J., Gomez-Guzman O., Gutiérrez-Miceli F., Lagunez-Rivera L., Martin Yañez-Limon, Matadamas-Ortiz T., Rodríguez N.Fuentes:scopusAn alternative scheme to measure single-point hysteresis loops using piezoresponse force microscopy
ArticleAbstract: We present a simple and low cost procedure to obtain the electromechanical response, in a single-poiPalabras claves:atomic force microscopy, Electromechanical response, Ferroelectrics, Hysteresis loops, PFMAutores:Cruz M.P., Flores-Ruiz F.J., Gervacio-Arciniega J.J., Martin Yañez-Limon, Murillo-Bracamontes E.A., Siqueiros J.M.Fuentes:scopusA microscopic model for the thermal conductivity of a porous 380-aluminium alloy
ArticleAbstract: The effective values of thermal diffusivity, specific heat, and thermal conductivity of a porous 380Palabras claves:Autores:Espinoza-Beltran F.J., González-Hernandez J., Martin Yañez-Limon, Ramírez A.M., Vorobiev Y.V.Fuentes:scopus