Quiles‐carrillo L.
104
Coauthors
20
Documentos
Volumen de publicaciones por año
Cargando gráfico
| Año de publicación | Num. Publicaciones |
|---|---|
| 2019 | 7 |
| 2020 | 7 |
| 2021 | 5 |
| 2022 | 1 |
Publicaciones por áreas de conocimiento
Cargando gráfico
| Área de conocimiento | Num. Publicaciones |
|---|---|
| Ciencia de materiales | 23 |
| Material compuesto | 13 |
| Polímero | 5 |
| Ingeniería ambiental | 4 |
| Cinética química | 2 |
| Ingeniería química | 2 |
| Ingeniería mecánica | 1 |
| Energía renovable | 1 |
| Reciclaje | 1 |
| Biotecnología | 1 |
Publicaciones por áreas temáticas
Cargando gráfico
| Área temática | Num. Publicaciones |
|---|---|
| Tecnología de otros productos orgánicos | 13 |
| Ingeniería y operaciones afines | 12 |
| Fabricación | 5 |
| Ingeniería química | 4 |
| Textiles | 4 |
| Otros productos finales y envases | 2 |
| Industria papelera | 2 |
| Construcción de edificios | 1 |
| Ingeniería sanitaria | 1 |
| Materiales de construcción | 1 |
Principales fuentes de datos
| Origen | Num. Publicaciones |
|---|---|
| Scopus | 20 |
| Google Scholar | 0 |
| RRAAE | 0 |
Cargando gráfico
Coautores destacados por número de publicaciones
| Coautor | Num. Publicaciones |
|---|---|
| Diego Lascano | 16 |
| Balart R. | 13 |
| Boronat T. | 10 |
| Montanes N. | 9 |
| Torres-Giner S. | 7 |
| Sandra Rojas-Lema | 6 |
| Ivorra-Martínez J. | 5 |
| Fages E. | 3 |
| Gomez-Caturla J. | 3 |
| García-García D. | 3 |
Cargando gráfico
Top Keywords
Cargando gráfico
Publicaciones del autor
Effect of infill parameters on mechanical properties in additive manufacturing
ArticleAbstract: The purpose of this paper is to study and outline the effects of infill parameters (percentage and pPalabras claves:additive manufacturing, Fused deposition modelÂling, Infill pattern, Infill percentage, PlaAutores:Boronat T., Diego Lascano, Ferrandiz-Bou S., Ivorra-Martínez J., Quiles‐carrillo L.Fuentes:scopusOptimization of the curing and post-curing conditions for the manufacturing of partially bio-based epoxy resins with improved toughness
ArticleAbstract: This research deals with the influence of different curing and post-curing temperatures on the mechaPalabras claves:Bio-based thermosets, Gel time, Mechanical properties, Post-curingAutores:Boronat T., Diego Lascano, Montanes N., Quiles‐carrillo L., Torres-Giner S.Fuentes:scopusOptimization of the loading of an environmentally friendly compatibilizer derived from linseed oil in poly(lactic acid)/diatomaceous earth composites
ArticleAbstract: Maleinized linseed oil (MLO) has been successfully used as biobased compatibilizer in polyester blenPalabras claves:Active containers, Biocomposites, Diatomaceous earth, Maleinized linseed oil MLO, poly(lactic acid)Autores:Agüero Á., Diego Lascano, Gonzalez L., Montanes N., Quiles‐carrillo L.Fuentes:scopusManufacturing of composite materials with high environmental efficiency using epoxy resin of renewable origin and permeable light cores for vacuum-assisted infusion molding
ArticleAbstract: This work focuses on the manufacturing and characterization of novel and lightweight hybrid sandwichPalabras claves:flax fibers, Hybrid composite materials, non-woven cores, silane coupling agents, VARIM process, basalt fibersAutores:Balart R., Boronat T., Diego Lascano, Quiles‐carrillo L., Valcárcel J.Fuentes:scopusKinetic analysis of the curing of a partially biobased epoxy resin using dynamic differential scanning calorimetry
ArticleAbstract: This research presents a cure kinetics study of an epoxy system consisting of a partially bio-sourcePalabras claves:Bio-sourced epoxy resin, Cure kinetics, Differential scanning calorimetry (DSC), Epoxy resinAutores:Balart R., Boronat T., Diego Lascano, Montanes N., Quiles‐carrillo L.Fuentes:scopus