Mostrando 10 resultados de: 16
Filtros aplicados
Subtipo de publicación
Article(16)
Área temáticas
Tecnología de otros productos orgánicos(13)
Ingeniería y operaciones afines(10)
Fabricación(4)
Ingeniería química(3)
Construcción de edificios(1)
Área de conocimiento
Material compuesto(7)
Polímero(4)
Cinética química(2)
Ingeniería ambiental(2)
Ingeniería química(2)
Origen
scopus(16)
Development and Characterization of Environmentally Friendly Insulation Materials for the Building Industry from Olive Pomace Waste
ArticleAbstract: This work is focused on the upgrading olive oil pomace to obtain high environmentally friendly insulPalabras claves:Composite material, insulating material, Non-woven, Olive pomace waste, Wet-laidAutores:Balart R., Diego Lascano, Fages E., Gutierrez O., Quiles‐carrillo L., Sánchez-Nácher L.Fuentes:scopusDevelopment and Characterization of Polylactide Blends with Improved Toughness by Reactive Extrusion with Lactic Acid Oligomers
ArticleAbstract: In this work, we report the development and characterization of polylactide (PLA) blends with improvPalabras claves:environmentally friendly, improved toughness, lactic acid oligomer (OLA), maleinized linseed oil (MLO), polylactide (PLA), Reactive extrusionAutores:Diego Lascano, Fiori S., García-Sanoguera D., Gomez-Caturla J., Montanes N., Quiles‐carrillo L., Tejada-Oliveros R.Fuentes:scopusDevelopment of injection-molded polylactide pieces with high toughness by the addition of lactic acid oligomer and characterization of their shape memory behavior
ArticleAbstract: This work reports the effect of the addition of an oligomer of lactic acid (OLA), in the 5-20 wt% raPalabras claves:Impact modifier, OLA, Packaging applications, Pla, Shape memoryAutores:Balart R., Boronat T., Diego Lascano, Ivorra-Martínez J., Moraga G., Quiles‐carrillo L., Sandra Rojas-Lema, Torres-Giner S.Fuentes:scopusFunctionalization of partially bio-based poly(ethylene terephthalate) by blending with fully bio-based poly(amide) 10,10 and a glycidyl methacrylate-based compatibilizer
ArticleAbstract: This work shows the potential of binary blends composed of partially bio-based poly(ethyelene terephPalabras claves:bio-based, compatibilization, Mechanical properties, MORPHOLOGY, Poly(amide) 1010-PA1010, Poly(ethyelene terephthalate)-PET, Xibond™ 920Autores:Balart R., Diego Lascano, Jorda M., Montanes N., Montava-Jorda S., Quiles‐carrillo L.Fuentes:scopusEffect of infill parameters on mechanical properties in additive manufacturing
ArticleAbstract: The purpose of this paper is to study and outline the effects of infill parameters (percentage and pPalabras claves:additive manufacturing, Fused deposition modelÂling, Infill pattern, Infill percentage, PlaAutores:Boronat T., Diego Lascano, Ferrandiz-Bou S., Ivorra-Martínez J., Quiles‐carrillo L.Fuentes:scopusOptimization of the curing and post-curing conditions for the manufacturing of partially bio-based epoxy resins with improved toughness
ArticleAbstract: This research deals with the influence of different curing and post-curing temperatures on the mechaPalabras claves:Bio-based thermosets, Gel time, Mechanical properties, Post-curingAutores:Boronat T., Diego Lascano, Montanes N., Quiles‐carrillo L., Torres-Giner S.Fuentes:scopusOptimization of the loading of an environmentally friendly compatibilizer derived from linseed oil in poly(lactic acid)/diatomaceous earth composites
ArticleAbstract: Maleinized linseed oil (MLO) has been successfully used as biobased compatibilizer in polyester blenPalabras claves:Active containers, Biocomposites, Diatomaceous earth, Maleinized linseed oil MLO, poly(lactic acid)Autores:Agüero Á., Diego Lascano, Gonzalez L., Montanes N., Quiles‐carrillo L.Fuentes:scopusManufacturing and characterization of highly environmentally friendly sandwich composites from polylactide cores and flax-polylactide faces
ArticleAbstract: This work focuses on the manufacturing and characterization of highly environmentally friendly lightPalabras claves:Eco-friendly sandwich structures, Hot compression molding, PLA honeycomb core, Three-point bending testAutores:Balart R., Boronat T., Diego Lascano, Guillen-Pineda R., Ivorra-Martínez J., Montanes N., Quiles‐carrillo L.Fuentes:scopusMechanical recycling of partially bio-based and recycled polyethylene terephthalate blends by reactive extrusion with poly(styrene-co-glycidyl methacrylate)
ArticleAbstract: In the present study, partially bio-based polyethylene terephthalate (bio-PET) was melt-mixed at 15-Palabras claves:Bio-PET, Chain extenders, Food packaging, r-PET, Reactive extrusion, Secondary recyclingAutores:Boronat T., Diego Lascano, Ferrandiz-Bou S., Martinez-Sanz A.V., Montanes N., Montava-Jorda S., Quiles‐carrillo L., Torres-Giner S.Fuentes:scopusMicroencapsulation of copper(ii) sulfate in ionically cross-linked chitosan by spray drying for the development of irreversible moisture indicators in paper packaging
ArticleAbstract: Copper(II) sulfate-loaded chitosan microparticles were herein prepared using ionic cross-linking witPalabras claves:CELLULOSE, Chitosan, Copper, Humidity sensors, Intelligent packaging, Ionic cross-linking, spray dryingAutores:Balart R., Fages E., Prieto C., Quiles‐carrillo L., Sandra Rojas-Lema, Terol J., Torres-Giner S.Fuentes:scopus