Mostrando 10 resultados de: 12
Filtros aplicados
Publisher
Applied Surface Science(2)
Materials Research(2)
Corrosion Science(1)
International Journal of Thermophysics(1)
Journal of Non Crystalline Solids(1)
Área temáticas
Ingeniería y operaciones afines(12)
Fabricación(4)
Física aplicada(4)
Tecnología de otros productos orgánicos(3)
Ingeniería química(1)
Área de conocimiento
Ciencia de materiales(12)
Cerámico(2)
Biomateriales(1)
Corrosión(1)
Ingeniería de manufactura(1)
Objetivos de Desarrollo Sostenible
ODS 9: Industria, innovación e infraestructura(12)
ODS 12: Producción y consumo responsables(10)
ODS 3: Salud y bienestar(6)
ODS 7: Energía asequible y no contaminante(4)
ODS 8: Trabajo decente y crecimiento económico(3)
Origen
google(1)
Characterization of mechanical properties and electrochemical behaviour in a Hank's solution of 316L/Cr1- xAlxN system
Conference ObjectAbstract: Cr<inf>1-x</inf>Al<inf>x</inf>N hard coatings were successfully deposited by R.F. reactive magnetronPalabras claves:Autores:Benitez-Castro A., Caicedo J.C., Giraldo-Betancur A.L., Martin Yañez-Limon, Mũoz-Saldãa J., Osorio D., Sanchéz O.M., William Arnulfo Ch Aperador, Zambrano G.Fuentes:scopusThermal characterization of PZT ceramics obtained by mechanically activated mixed oxides using different Pb sources
ArticleAbstract: In this study, three sets of PZT samples with compositions 57/43 and 55/45 (rhombohedral phase), 53/Palabras claves:Curie temperature, Ferroelectrics, Photoacoustic spectroscopy, Pyroelectrics, Specific heat, Thermal diffusivityAutores:Bolarín-Miró A., Martin Yañez-Limon, Mũoz-Saldãa J., Ramírez-López L.M., Rivera-Ruedas G., Sánchez De Jesús F.Fuentes:scopusStatistical characterization of the lapping plate surface morphology evolution in a diamond charging process
ArticleAbstract: The topographical evolution of a lapping plate surface during a diamond charging process was followePalabras claves:atomic force microscopy, diamond charging process, Height correlation function, Lapping plate topographyAutores:Espinoza-Beltran F.J., Martin Yañez-Limon, Mayén-Mondragón R., Montero-Camacho O., Mũoz-Saldãa J., Ramírez-Bon R., Rocha-Gallardo H.Fuentes:scopusCorrosion study of Alumina/Yttria-Stabilized Zirconia (Al2O3/YSZ) nanostructured Thermal Barrier Coatings (TBC) exposed to high temperature treatment
ArticleAbstract: Thermal Barrier Coatings (TBC) of 8% Yttria-Stabilized Zirconia (8YSZ) were deposited on AISI-304 suPalabras claves:Electrochemical impedance spectroscopy, Thermal Barrier Coatings, thin films, yttria-stabilized zirconiaAutores:Amaya C., Caicedo J.C., Espinoza-Beltran F.J., Mũoz-Saldãa J., Prieto P., William Arnulfo Ch Aperador, Zambrano G.Fuentes:scopusEffect of HVOF processing parameters on the properties of NiCoCrAlY coatings by design of experiments
ReviewAbstract: The effect of three principal, independent, high-velocity oxygen fuel (HVOF)-processing parameters oPalabras claves:design of experiments, HVOF, NiCoCrAlY, process parameters, Properties, Residual stressAutores:Alfredo Valarezo, Alvarado-Orozco J.M., Espinoza-Beltran F.J., Lozano-Mandujano D., Mũoz-Saldãa J., Poblano-Salas C.A., Ruiz-Luna H., Trápaga-Martínez L.G.Fuentes:googlescopusEffect of applied bias voltage on corrosion-resistance for TiC 1-x N x and Ti 1-x Nb x C 1-y N y coatings
ArticleAbstract: Corrosion-resistance behavior of titanium carbon nitride (Ti-C-N) and titanium niobium carbon nitridPalabras claves:electrochemical properties, Raman spectra, X-ray scatteringAutores:Alvarado-Rivera J., Amaya C., Caicedo J.C., Gómez M.E., Mũoz-Saldãa J., Prieto P., William Arnulfo Ch Aperador, Yate L., Zambrano G.Fuentes:scopusElectrodeposition of Chitosan on Ti-6Al-4V Surfaces: A Study of Process Parameters
ReviewAbstract: The effect of different electrodeposition variables of chitosan coatings on Ti-6Al-4V substrates isPalabras claves:bioactive coatings, Chitosan, electrochemical deposition, Hydrogel, metallic implantsAutores:Alfredo Valarezo, D. Álvarez, Daniela A. Viteri, Doménica Alvarez, Giraldo-Betancur A.L., José F. Álvarez-Barreto, Lorena Bejarano M., Marco Leon, Mũoz-Saldãa J.Fuentes:scopusErratum: Electrodeposition of Chitosan on Ti-6Al-4V Surfaces: A Study of Process Parameters (Materials Research 25 (e20210552) DOI: 10.1590/1980-5373-MR-2021-0552)
OtherAbstract: In the article “Electrodeposition of Chitosan on Ti-6Al-4V Surfaces: A Study of Process Parameters”,Palabras claves:Autores:Alfredo Valarezo, D. Álvarez, Daniela A. Viteri, Doménica Alvarez, Giraldo-Betancur A.L., José F. Álvarez-Barreto, Lorena Bejarano M., Marco Leon, Mũoz-Saldãa J.Fuentes:scopusMechanical and thermal properties of SiO2-PMMA monoliths
ArticleAbstract: Organic-inorganic hybrid monoliths of cross-linked polymethylmethacrylate (PMMA) and silica (SiO<infPalabras claves:Atomic force and scanning tunneling microscopy, Crack growth, Fracture, FTIR measurements, hardness, Indentation, microindentation, Lasers, mechanical properties, Optical microscopy, Organic-inorganic hybrids, Sol-gels (xerogels), thermal properties, Time resolved measurementsAutores:Almaral-Sánchez J., Avila-Herrera C., Gomez-Guzman O., Martin Yañez-Limon, Mũoz-Saldãa J., Ramírez-Bon R.Fuentes:scopusMechanical, tribological, and electrochemical behavior of Cr 1-x Al x N coatings deposited by r.f. reactive magnetron co-sputtering method
ArticleAbstract: Chromium aluminum nitride (Cr <inf>1-x</inf> Al <inf>x</inf> N) coatings were deposited onto AISI H1Palabras claves:Co-sputtering, CORROSIÓN, Friction, Hard coatings, NanoindentationAutores:Amaya C., Beltran F.E., Caicedo J.C., Ipaz L., Landaverde M.A.H., Mũoz-Saldãa J., Sanchéz J.E., Sanchéz O.M., William Arnulfo Ch Aperador, Zambrano G.Fuentes:scopus