Mostrando 10 resultados de: 10
Filtros aplicados
Publisher
Acta Microscopica(2)
Revista de la Facultad de Ingenieria(2)
Journal of Materials Science(1)
Materials Science Forum(1)
Materials Science and Technology(1)
Corrosion study of TI6A14V alloy used such as biomaterial
ArticleAbstract: In the current work the corrosion behavior of a Ti6Al4V alloy was evaluated by linear polarization rPalabras claves:Biomaterials, Phase α, Phase β, Potenciodynamics polarization, Ti6Al4V alloyAutores:Camero S., González W., León J., Luis José Borrero González, Réquiz R., Rosales A., Suárez M., Talavera I.Fuentes:googlescopusEffect of 0.1% vanadium addition on precipitation behavior and mechanical properties of Al-6063 commercial alloy
ArticleAbstract: The effect of 0.1 wt% vanadium additions on the precipitation behavior and the mechanical propertiesPalabras claves:Autores:Camero S., Luis José Borrero González, Puchi E.Fuentes:googlescopusHydrogen damage of a welded API 5L X52 steel
ArticleAbstract: The main objective of the present investigation was to study the susceptibility to hydrogen damage oPalabras claves:Api 5l x52 steel, Blistering, Electrical resistance welding, Hydrogen damage, Hydrogen permeationAutores:Ana Luisa Rivas, Aristizabal V., Camero S., Réquiz R.Fuentes:scopusMicrostructural and mechanical properties evolution during an isothermal annealing of a 0.04 % C al-killed steel
ArticleAbstract: The effect of heating rate and annealing time on the microstructure and mechanical properties of a cPalabras claves:Isothermal annealing, Pancake structure, RecrystallizationAutores:Ana Luisa Rivas, Cabrera J.M., Camero S., Machado J.C., Millán J.C.Fuentes:scopusMicrostructural evolution of a commercial 0.04%C steel during batch annealing
Conference ObjectAbstract: The effect of heating rate and annealing time on the microstructure and texture of a commercial 0.04Palabras claves:Batch annealing, low carbon steel, textureAutores:Ana Luisa Rivas, Cabrera J.M., Camero S., Kestens L., Millán J.C.Fuentes:scopusMicrostructure and texture evolution of a 0.04%C steel subjected to an isothermal annealing
Conference ObjectAbstract: This work describes the effect of heating rate and annealing time on the microstructure and texturePalabras claves:Isothermal annealing, Pancake structure, Recrystallization, textureAutores:Ana Luisa Rivas, Cabrera J.M., Camero S., Machado J.C., Millán J.C.Fuentes:scopusRecrystallization process during the annealing of a 0,04%C Al-killed steel
ArticleAbstract: The recrystallization process of a commercial 0.04%C Al-killed steel, cold rolled up to 80% subjectePalabras claves:AIN precipitates, Pancake structure, RecrystallizationAutores:Ana Luisa Rivas, Cabrera J.M., Camero S., Machado J.C., Millán J.C.Fuentes:scopusRelationship between microstructure and hydrogen permeation of a plastic deformed seamless carbon steel pipe
Conference ObjectAbstract: The main objective of this work was to study the effect of plastic deformation (cold work) and heatPalabras claves:cold work, Hydrogen damage, Hydrogen permeation, STEELAutores:Ana Luisa Rivas, Camero S., Réquiz R.Fuentes:scopusSEM fractographic analysis of compacts obtained by wastes and solid wastes of domestic origin
ArticleAbstract: Fractographic analysis was performed on cylindrical compact by Scanning Electron Microscopy (SEM) ofPalabras claves:Composite material, Fractography, Mechanical properties, SOLID WASTE, WasteAutores:Camero S., Franco F., García S., Molina A., Rebeca M. SánchezFuentes:scopusStudy of the susceptibility to corrosion on Ti6Al4V alloy coating with hydroxypatite in simulated body fluid (SBF)
ArticleAbstract: In this study the susceptibility to corrosion was evaluated in a Ti6Al4V alloy with three coatings oPalabras claves:Coating, CORROSIÓN, Hydroxyapatite, SBF, Ti6Al4VAutores:Briceño R., Camero S., Luis José Borrero González, Rosales A.Fuentes:googlescopus