Mostrando 10 resultados de: 63
Filtros aplicados
Publisher
Applied Physics A: Materials Science and Processing(6)
Journal of Materials Science: Materials in Electronics(4)
Journal of Applied Physics(3)
Journal of Non-Crystalline Solids(3)
European Physical Journal: Special Topics(2)
Área temáticas
Física aplicada(17)
Tecnología de otros productos orgánicos(14)
Química física(10)
Química inorgánica(10)
Cristalografía(5)
Área de conocimiento
Ciencia de materiales(60)
Cerámico(12)
Biomateriales(6)
Material compuesto(6)
Nanopartícula(3)
Origen
scopus(63)
Characterization and Quantification of the Phases Concentration of Cu60–Zn40 Alloy as Candidate Reference Material
ArticleAbstract: This study describes the process of evaluating a commercially available copper–zinc alloy with the gPalabras claves:Optical microscopy, Phase percentage, reference material, Scanning Electron Microscopy, X-ray fluorescenceAutores:Herrera-Basurto R., Juárez-García J.M., Manzano-Ramírez A., Martin Yañez-Limon, Mercader-Trejo F., Rodríguez-López A., Rojas-Chávez H.Fuentes:scopusCharacterization of carbon films microstructure by atomic force microscopy and Raman spectroscopy
ArticleAbstract: Atomic force microscopy has been used to study the surface irregularities of hydrogenated and unhydrPalabras claves:Autores:González-Hernandez J., López-Cruz E., Martin Yañez-Limon, Ruiz F., Vázquez-López C.Fuentes:scopusCharacterization of lead zirconate titanate (53/47) films fabricated by a simplified sol-gel acetic-acid route
ArticleAbstract: Lead zirconate titanate [PZT (53/47)] films (around 200 nm thick) were prepared by the sol-gel acetiPalabras claves:Autores:Espinoza-Beltran F.J., Herrera-Gomez A., K. M. Moya-Canul, López Beltrán A.M., Martin Yañez-Limon, Mayén-Mondragón R., Vazquez-Lepe M.Fuentes:scopusCharacterization of mechanical properties and electrochemical behaviour in a Hank's solution of 316L/Cr<inf>1-</inf><inf>x</inf>Al<inf>x</inf>N system
Conference ObjectAbstract: Cr1-xAlxN hard coatings were successfully deposited by R.F. reactive magnetron co-sputtering in an APalabras claves:Autores:Benitez-Castro A., Caicedo J.C., Giraldo-Betancur A.L., Martin Yañez-Limon, Mũoz-Saldãa J., Osorio D., Sanchéz O.M., William Arnulfo Ch Aperador, Zambrano G.Fuentes:scopusChitosan-BaTiO<inf>3</inf> nanostructured piezopolymer for tissue engineering
ArticleAbstract: Herein we report the synthesis of a piezopolymer composed of chitosan (CS)/hydroxylated BaTiO3 (OH-BPalabras claves:BaTiO nanoparticles 3, Biocompatibility, Chitosan, nanocomposites, PiezoelectricAutores:Bárcenas G.L., España Sánchez B.L., Franco B., Hernández-Landaverde M.A., López R.A., Martin Yañez-Limon, Padilla-Vaca F., Prokhorov E.Fuentes:scopusAssessment of coconut fibre insulation characteristics and its use to modulate temperatures in concrete slabs with the aid of a finite element methodology
ArticleAbstract: This paper presents the assessment of coconut fibre thermal characteristics and its use to modulatePalabras claves:coconut, density, FEM, Fibre, Heat, Heat capacity, Insulation, thermal conductivityAutores:Feijoo J., Gomez-Guzman O., Gutiérrez-Miceli F., Lagunez-Rivera L., Martin Yañez-Limon, Matadamas-Ortiz T., Rodríguez N.Fuentes:scopusAn alternative scheme to measure single-point hysteresis loops using piezoresponse force microscopy
ArticleAbstract: We present a simple and low cost procedure to obtain the electromechanical response, in a single-poiPalabras claves:atomic force microscopy, Electromechanical response, Ferroelectrics, Hysteresis loops, PFMAutores:Cruz M.P., Flores-Ruiz F.J., Gervacio-Arciniega J.J., Martin Yañez-Limon, Murillo-Bracamontes E.A., Siqueiros J.M.Fuentes:scopusA microscopic model for the thermal conductivity of a porous 380-aluminium alloy
ArticleAbstract: The effective values of thermal diffusivity, specific heat, and thermal conductivity of a porous 380Palabras claves:Autores:Espinoza-Beltran F.J., González-Hernandez J., Martin Yañez-Limon, Ramírez A.M., Vorobiev Y.V.Fuentes:scopusA non-destructive method for determination of thermal conductivity of YSZ coatings deposited on Si substrates
ArticleAbstract: Thermal diffusivity (α) of YSZ coatings was determined by the phase lag method of the photo-acousticPalabras claves:Non-destructive evaluation, structural properties, Thermal Barrier Coatings, thermal conductivity, Thermal diffusivityAutores:Amaya C., Caicedo J.C., Gómez M.E., Martin Yañez-Limon, Prieto P., Vargas R., Zambrano G.Fuentes:scopusDevelopment and characterization of an inorganic foam obtained by using sodium bicarbonate as a gas generator
ArticleAbstract: In the construction industry almost all of the insulating and expansive materials are organic foams.Palabras claves:Ceramic material, Microstructural characterization, Thermal analysisAutores:Alonso-Guzmán E., Contreras-García M., González-Hernandez J., Manzano-Ramírez A., Martin Yañez-Limon, Rubio-Avalos J.Fuentes:scopus